3 ms·
Look more closely at the example of the drill, with the exception of the batteries, can you go out and buy a new motor when it burns out? Can you go out and buy
by gwbas1c 7y ago
Look more closely at the example of the drill, with the exception of the batteries, can you go out and buy a new motor when it burns out? Can you go out and buy a new trigger?
At a certain point, electronics becomes cheaper and more reliable as components get so tightly integrated that they aren't replaceable.
Anyway, this makes me wonder if there's a niche for a "portable computer" that is comprised of standard, easily-replaceable parts. I probably wouldn't buy one, but I wonder who would?
- bochoh 7y agoThe idea of the modular CPU / GPU on this is appealing if only for the idea that your GPU could be upgraded yearly instead of having to shell out for an entire machine. https://www.extremetech.com/gaming/283336-alienwares-latest-laptop-comes-with-upgradeable-cpu-gpu-options https://www.extremetech.com/gaming/283336-alienwares-latest-...
- toast0 7y agoThe idea is nice, but basically zero of these laptop ideas have turned into a worthwhile execution. Intel sockets offer at most one upgrade cycle, and of late require a firmware update for that, so really the upgrade potential is from a low end chip to a high end chip in the same architecture, but the socketed systems often cost a lot more than a soldered system. The GPU modules are also subject to the continued viability of the form factor. Recent trends for reduced GPU power consumption make this more likely to hold up, but still kind of iffy. Something with real potential for upgrades would be a standardized motherboard size, including z-height, and cooler positioning; then you could swap in a new board and reuse the chasis/display. Of course, you would need to standardize the type and position of display connections and connectors for keyboard and pointing device and battery and what not. I don't think the manufacturers would gain much though --- if it was useful to them for this to be standard across models and model years, we would see some of them with an internal standard instead of every model being similar but not the same on the inside.
- gwbas1c 7y ago> GPU could be upgraded yearly That only works if there's no improvements other than pure speed. In reality, the bus and socket improve too. For example, if your GPU socket is new, and your GPU is an early generation, a die shrink due to transistor shrink might be pin compatible but faster. Otherwise, the next generation of GPU is probably going to require a different socket and/or bus, ect, ect, that it's uneconomic to support merely exchanging the GPU.
- nottorp 7y agoCheck out the librem phone... you'll notice there's a lot of compromise there.
- bluGill 7y agoFor a good drill you can replace the trigger. I've done it myself a few times. Same site that sells the trigger also sells replacement brushes for the motor, but I've not replaced them myself. I suspect a replacement motor would be as expensive as the new tool and so not worth it.
- noobermin 7y agoIt makes a delta but it's not like there isn't a demand out there for a longer term computer. Demand isn't the only thing, especially when you can create it like Apple can.
- deleted 7y ago[deleted]
- jacobsenscott 7y agoSure, but motors last many times longer than the batteries. On old laptops you could replace the parts that get obsolete. The memory, cpu, hard drive. But probably not the parts that last - the screen or the power supply.
- deleted 7y ago[deleted]
- cxr 7y ago> a "portable computer" that is comprised of standard, easily-replaceable parts bunnie's Novena is something like this, and he even went so far as to make it run with batteries normally used for RC cars.