4 ms·
I've always assumed that LED backlight TVs have this kind of correction built in and must be calibrated at the factory with a similar jig (calibrated camera loo
by taneq 7y ago
I've always assumed that LED backlight TVs have this kind of correction built in and must be calibrated at the factory with a similar jig (calibrated camera looks at screen, screen shows sweeps through black->(red|green|blue), inverse mapping is recorded to correct colour and intensity).
Nice hack to do it with a webcam. :)
- nrp 7y agoOLED phones, TVs, and other OLED products do this kind of uniformity correction with factory calibration. On some, the calibration data is stored on Flash or EEPROM on the panel itself and applied in the Display Driver IC. In others its stored and applied at system level by a Display Controller or SoC. I'm aware of some LCD-based products that do this as well, but I'm not sure if TVs are among them. It's a great way to improve uniformity though, and almost always cheaper than tightening manufacturing tolerances (i.e. decreasing yield).
- daniel_reetz 7y agoExactly right. Apple does this for every LCD. In the LED display industry calibration can be per LED, per PCB, per module, or per display. Some of them store the calibration data on each individual LED PCB, and some store it in the send box (Brompton).