4 ms·
CAS is the full round trip time, the controller does not care about individual components of the latency just the total latency. End users just see the CAS numb
by Retric 7y ago
CAS is the full round trip time, the controller does not care about individual components of the latency just the total latency. End users just see the CAS number, but what it’s repressing under the hood is not simply what’s going on inside a DIMM, which is why the numbers get higher with higher memory clock speeds.
Further, MB traces are just part of the story. It’s the physical distance traveled from a CPU’s memory controller to the furthest physical cell location on a chip which is significantly more than 10cm and it’s a round trip timing. Even just the physical DIMM’s are 13 CM wide.
A more accurate ~25 cm each way = 50 cm total ~= 3ns out of 6.56ns timing for a DDR3-2133 & CAS 7 ~47%. CAS 18 DDR4-4600 is 7.82 ns or ~40%.
PS: As to progress, DDR2-1066 at CAS 4 was 7.5n where CAS 18 DDR4-4600 is 7.82 ns that’s some progress.
- rasz 7y ago2005 Intel server memory controller datasheet states up to 800mils for die to BGA ball distance (huge chip), thats 2cm. Newer stuff is hard to dig up. Afaik JEDEC DDR3/4 layout guidelines state no more than 4.5 inches to DIMM socket, 5 inches ball to ball. Max connector to ball length for DDR4 UDIMM is ~3cm. All in all max ~17cm.