4 ms·
(2016) See Wikipedia.[1] Press release from University of Bristol.[2] Article which actually has some numbers.[3] 100μW for 5,000 years. Maybe power a dumb wa
by Animats 7y ago
(2016) See Wikipedia.[1]
Press release from University of Bristol.[2]
Article which actually has some numbers.[3] 100μW for 5,000 years. Maybe power a dumb watch. 10 to 15 of those might power a hearing aid.
This might have potential for tracking devices where cost is not a big issue. Trickle-charge a capacitor until there's enough energy for a burst transmission.
"Near-infinite power", no.
[1] https://en.wikipedia.org/wiki/Diamond_battery https://en.wikipedia.org/wiki/Diamond_battery
[2] https://www.bristol.ac.uk/news/2020/january/recycling-nuclear-waste-for-diamond-battery.html https://www.bristol.ac.uk/news/2020/january/recycling-nuclea...
[3] https://www.electronicsweekly.com/news/research-news/diamond-nuclear-battery-generate-100%CE%BCw-5000-years-2016-12/ https://www.electronicsweekly.com/news/research-news/diamond...
- crooked-v 7y agoTile tracker tags use a 3V 130mAh CR1632 battery, which lasts for a year... I wish I remembered the math to figure out what trickle wattage that works out to, for comparison.
- kalenx 7y ago3*0.130 = 0.39 Wh Over 5000 years it would amount to about 8.9 nW (nanowatt), of course assuming the chemistry to be able to sustain such time span (which is not).
- doersino 7y agoIf drained over a year (which is as long as the battery from the post you're responding to is supposed to last), it works out to: 390 mWh / (24 h * 365 d/Y) ≈ 0.061 mW = 61 μW
- crooked-v 7y agoIn that case, one of these diamond batteries would be able to substitute for the CR1632 and give a sealed tracker an effectively infinite lifetime (at least compared to, well, human civilization). I imagine it would be pricey, though.
- jfengel 7y agoIt also wouldn't be able to do drive a speaker, another key purpose of a Tile. Its actual tracking is primarily passive, so it's hard to locate with just a phone. (You might be able to triangulate from multiple phones... I recall an HN article with somebody doing that a few weeks ago). The main use case is to get close enough to trigger it, then follow your ears. That's thousands of milliwatts. I suppose it might be possible to add a capacitor that's being continually charged.
- sbierwagen 7y agoPiezo buzzers can be more efficient than that. This 95 cent buzzer sold by Adafruit is rated to 9V at 3mA: https://www.adafruit.com/product/1740 https://www.adafruit.com/product/1740
- jfengel 7y agoIs it loud enough? Tiles are supposed to be detectable at up to 300 feet, but that's less useful if you can't actually hear it. I don't actually know the specs they use for that. I just figured that it would take a few watts to be heard at distances over tens of feet.
- deleted 7y ago[deleted]
- justinclift 7y agoStill, even an Arduino Uno class processor (Atmega 328P) can be tuned to run on as little as 100nA: http://www.gammon.com.au/power http://www.gammon.com.au/power So, it's not entirely a silly idea. :)
- SethTro 7y ago> Temperature – physically stable at 750 °C. Yep, I'd like to see a source on this.