5 ms·
Analogue TV encoders took a signal with a dynamic range of "black to white" (e.g. 0V to 5V) and, before modulating it onto a carrier frequency, first compressed
by derefr 7y ago
Analogue TV encoders took a signal with a dynamic range of "black to white" (e.g. 0V to 5V) and, before modulating it onto a carrier frequency, first compressed the signal upwards, making it into a smaller range of e.g. 1V to 5V, making it into a signal that's actually more like "dark grey to white." Analogue TV decoders did the opposite, treating 1V as the "black level", stretching the 4V "dynamic range" back into the full black-to-white intensity range.
Doing this allowed "true 0V" (i.e. gaps cut out of the modulated signal by electronic post-processing, below the "minimum" intensity of 1V, where you're just getting carrier) to act as a form of in-band signalling. 0V was used "outside" the image to both synchronize the TV's raster electronics, and inform said electronics of the period of time they should be off altogether, rather than firing even a weak electron beam. (This most noticably prevents your CRT from drawing a subtle diagonal swoosh when it starts each new frame.)
See also: the terms "front porch" and "back porch" (in e.g. https://electronics.stackexchange.com/questions/201011/what-is-front-porch-and-back-porch-of-a-video-signal-in-crt-display https://electronics.stackexchange.com/questions/201011/what-...), referring to the parts of each scanline that are 0V.
- hyperdimension 7y agoInteresting to see 'superblack'. I always remember reading the terms 'blacker than black' and 'whiter than white' in old TV repair/theory books.
- taneq 7y agoSo given that many TVs displayed a flat blue screen on no signal, does that mean that blue is blacker than black?
- SECProto 7y agoI can't recall ever seeing an analogue TV display a flat blue screen - with no signal, they generally display black&white noise
- gwbas1c 7y agoThe newer ones made in the late 1990s did.
- DrStalker 7y agoI can remember it, I think in setups where the TV signal was passed through a VCR (so it could be recorded) and then into the TV. If the VCR detected there was no useful signal it would output a blue image instead of static. Just showing raw static was much more common though.
- namdnay 7y agoThis reminds me of the fact that younger generations have a completely different understanding of the first sentence of Neuromancer
- Animats 7y agoNot colored noise, amusingly. NTSC color TV is backwards compatible with NTSC black and white TV. Color comes in on a subcarrier of the TV signal, relative to the black and white signal, and is low bandwidth compared to the intensity signal. Because the color signal is optional, TV receivers had to have a detector for it to enable color. Noise didn't contain the "color burst" that identified the color signal, so noise showed as black and white noise, not colored confetti. At least until TV receivers acquired enough signal processing that no-signal produced a "No Signal" message, a blue screen, or a channel guide. Gibson has written that he has mixed feelings about that line. Great line, but dates the work.
- tenebrisalietum 7y agoIn the early 90's, TV's started including low-resolution "Teletype" type chips (the kind you see overlay information on security cameras) that would generate menu text for volume control, etc. Frequently these TV's would have a "muting" mechanism - if you selected a channel without a signal, it would mute the audio and display a blue background instead of the underlying signal. When LCD TV's and HDTV started gaining traction the "No Signal" screen was often some text bouncing around in some manner.
- smogcutter 7y agoThat’s a later development in CRT TVs, where if there’s no signal you get a flat blue generated by the TV instead of noise. Hence the often quoted tidbit that Gibson’s line “The sky was the color of a television tuned to a dead channel” (close enough) doesn’t scan as a grey sky for younger readers.
- wruza 7y agoHmm, I do remember both. It was not even grey, static is high-contrast flickering of b/w dots or short lines with an amount of random grey between them (maybe soviet static was staticker, idk). For me and sky, blue makes sense, static just doesn’t. If I read it before blue screens appeared, maybe it could. https://www.canstockphoto.com/real-tv-static-10531607.html https://www.canstockphoto.com/real-tv-static-10531607.html
- jacobush 7y agoI think you are supposed to view the CRT from a bit afar, then you'd get that gray feeling. Also these "bands" were either jumping too much up and down to be noticable or not appearing at all on the old purely analog sets. As I remember them, the static was truly chaotic, no lines.
- wruza 7y agoI guess it may depend on a signal saturation. Some empty channels were relatively dim and sparse, and some screamed white morse at you. That picture is not exactly what we should have seen, for one I cannot count 500+ lines in there. It must be only a part of a screen or a non-standard resolution (or a very short expo that captured half-frame?). Couldn’t find a good one quickly.
- taneq 7y ago> static is high-contrast flickering of b/w dots or short lines with an amount of random grey between them Like snow, even. Hence 'Snow Crash'. :) I imagine the sky in a predominantly cold, snowy or rainy place could look a bit like static. Dry sunny climates are tend to be more "A/V 1" blue. :)
- 0xcde4c3db 7y agoOne consequence of this setup that people might remember: the Nintendo Entertainment System can produce a "color" below the standard black level because of the primitive (albeit clever) scheme used to generate the video signal. It's been alleged that this was forbidden for licensed games, but a few games (and the Game Genie) did use it [1], causing an unstable image on some TVs. [1] http://wiki.nesdev.com/w/index.php/Color_$0D_games http://wiki.nesdev.com/w/index.php/Color_$0D_games
- smogcutter 7y agoAs long as we’re talking about analog video, I can’t stop myself from throwing Dan Sandin’s analog image processor in there. Think the principles of a moog synth, applied to video signal. Here’s a totally amazing video of him demonstrating the machine, circa mid 70s: https://youtu.be/8qh6jRzjmcY https://youtu.be/8qh6jRzjmcY Sandin also had a distribution philosophy that was a precursor (early contemporary?) to FOSS: he called it “copy-it-right”. He’d send anyone a copy of the schematics, but you were expected to build it as designed and not get creative until you at least had it working properly. The process of building the machine was also supposed to teach you how it worked. Many moons ago I emailed Sandin and got a copy of the plans. They’re a hell of a document. Unfortunately some critical components are no longer in production, and updating the schematics was beyond my skill (setting aside that the scale and expense of the project was also beyond me, but hey).
- miek 7y agoAwesome video, thanks for posting that. I'll add a more recent interview with Sandin that is pretty interesting: https://m.youtube.com/watch?v=Izx2CqxM71s https://m.youtube.com/watch?v=Izx2CqxM71s