3 ms·
How would a reverse osmosis filter hooked up in the basement / under the sink compare to distillation? The good ones spit out water that is close to 0 PPM (in m
by Liquix 7y ago
How would a reverse osmosis filter hooked up in the basement / under the sink compare to distillation? The good ones spit out water that is close to 0 PPM (in most municipal water systems tap water is closer to 60-200). Is PPM a good way of measuring the types of chemicals you mentioned?
- hurxnid 7y agoThat would almost certainly work but make sure to remineralize the water after.
- dmm 7y agoI have been drinking non-remineralized reverse osmosis water since conception and I'm fine. Plus remineralization isn't as effective as you would think. Most of the minerals removed by RO can't be easily reintroduced as they aren't readily dissolved.
- ryanmercer 7y agoAs long as you're eating a varied diet (such as eating a good variety of plants) drinking demineralized water really isn't an issue. I've been eating plant based whole food lately and at 1903 kcals yesterday I managed (per Cronometer): - 646.4mg of calcium - 636.1mg of magnesium - 785.1mg of sodium Which are the 3 big ones in common tap water. Even if you factor in a 25% error margin, through my diet I'm getting way more than I would drinking random tap water.
- saberience 7y agoSo as a baby your parents were only giving you RO water? Then during your whole time at high-school and college you only drank RO water? Errr, I don't believe you.
- ryanmercer 7y agoRO will still have some chemicals it can't remove. Per the CDC: >Reverse Osmosis Systems will remove common chemical contaminants (metal ions, aqueous salts), including sodium, chloride, copper, chromium, and lead; may reduce arsenic, fluoride, radium, sulfate, calcium, magnesium, potassium, nitrate, and phosphorous. https://www.cdc.gov/healthywater/drinking/home-water-treatment/household_water_treatment.html https://www.cdc.gov/healthywater/drinking/home-water-treatme...
- stamps 7y agoA lot of RO systems come with a sediment filter, carbon filter, and UV as part of the package. Seems about as close as you can get to completely clean water.
- logfromblammo 7y agoElectrolyze water in one vessel. Combust the gases in another vessel, and condense the water vapor. Hilariously inefficient use of energy, but I think the only contaminants you are likely to encounter would be... nitrous oxide (N2O)?
- gpm 7y agoI'd be less worried about the contaminants in the water, and more worried about the contaminants in the air. As I understand it electrolysis of water converts chloride salts (table salt) to chlorine gas (poisonous), fluoride salts (rarer) to fluoride gas (really poisonous), etc.
- logfromblammo 7y agoElectrolysis only produces chlorine to the extent that chloride ion is present in the water. If the charge-carrying ions are metallic positive and hydroxide negative, the chlorine produced will be negligible. So to promote electrolysis, add KOH or NaOH (lye) instead of NaCl (table salt). Or don't add anything, and let your charge carriers be H3O+ and HCO3- from dissolved CO2. The chlorine will come off first, and if you have a reducible anode, it will attack that first. If you have a graphite anode, you will get Cl2, which will oxidize pure hydrogen just fine. You'll get HCl in the combustion, which isn't dangerous when diluted (it's the same acid that's produced in your stomach). Fluorine gas is not produced from aqueous fluoride salts because the oxygen is always oxidized first. The half-reactions: 2 H2O + 2 e- --> H2 + 2 [OH-] (-0.83 V) 2 H2O --> O2 + 4 [H+] + 4 e- (-1.23 V) 2 [Cl-] --> Cl2 + 2 e- (-1.36 V) 2 [F-] --> F2 + 2 e- (-2.87 V) Even if you do get a F2, it immediately reacts with the electrolysis water to produce oxygen gas: 2 F2 (g) + 2 H2O (l) --> 4 HF (aq) + O2 (g) In short, this is not much of a problem. By the redox half-reactions, it looks like oxygen should be produced before chlorine, but there is also something called "overpotential" at the electrode. On a graphite electrode, the activation overpotentials for H2, O2, and Cl2 are -0.62V, +0.95V, and +0.12V, respectively. There is also a "bubble overpotential" of the tiny bubbles that form on the electrode. That pushes the preference towards chlorine gas. Tiny oxygen bubbles will form, but the energy required to grow them large enough to detach from the electrode and rise to the surface exceeds that required to form and grow a chlorine bubble.
- lm28469 7y agoDoesn't RO needs 3+ liters to get you 1L of purified water ? It doesn't look like this would be viable long term + it doesn't solve the root cause, just the symptoms.