4 ms·
I use a box fan with filters taped to each side. You want to do both sides or the air gets pushed/pulled around the edges of the blades, rather than going throu
by verdverm 7y ago
I use a box fan with filters taped to each side. You want to do both sides or the air gets pushed/pulled around the edges of the blades, rather than going through the filters.
- dredmorbius 7y agoThat's doable, though you're increasing initial cost by about 1/3, and doubling consumables, by using two filters. The net effective increased filtration rate is marginal. If you can afford this without concern, it's fine, but it's not necessary.
- verdverm 7y agoIt works with two and not with one, so pretty much required. The effect is far from marginal in my setup. Also far cheaper then the post link, less than half.
- dredmorbius 7y agoNumerous documented and tested builds with only one. https://invidio.us/watch?v=kH5APw_SLUU https://invidio.us/watch?v=kH5APw_SLUU YMMV.
- verdverm 7y agoCool, don't really care, happy with my double filtered setup