13 ms·
OpenWrt 19.07
- nemosaltat 7y agoI just installed this today and have been struggling with the WPA3 on my Linksys all evening. I finally gave up for the evening, and opened HN, to find these release notes at the top of the front page. Some of my specific issues were addressed, if I had simply bothered to read the release notes carefully. Instead, I found my update file, and updated. When WPA3 didn’t show up, I poked around forums for workarounds and finally found some answers that helped. Now my other clients couldn’t connect/stay connected, even to the WPA2. These notes clearly mention this, as well as the libup issue I solved via - -force-upgrading
- mangix 7y agoThose linksys routers have a driver that has had its development killed by the NXP buyout of Marvell.
- slau 7y agoPlease note that the popular TP-Link Archer C7 v2 is affected by a bug or two which drops 5Ghz WiFi performance significantly. Some people are reporting the link quality is so bad even SSH is unusable. As always, back up your config, and make a note of your working firmware before upgrading. I’m going to sit this one out for a bit :).
- mangix 7y agoI run OpenWrt on this router. I have not seen this issue.
- slau 7y agoThere’s a number of hardware revisions of this particular router, and the origin of the bug(s) is not yet identified. Maybe it only affects specific configurations, or specific hardware revisions using certain configurations.
- dzhiurgis 7y agoMy short story with router above: > Get one for my parents, flash it with OpenWRT - 200mbps down - not crazy but enough for them > One year later, update with an "optimized" version - 600mbps down - amazed > One year later, update with latest - down to 200mbps and can't find the build I've used previously!
- klingonopera 7y agoAlways, always, always save those ROMs. Same for BIOS/UEFI updates for your mobos. You won't regret it.
- klingonopera 7y ago...and also your phone ROMs, if you flash them. And drivers. And everything else you need to operate your devices. I have a Moto G2 a.k.a. "Titan" (2014), flashed it to LineageOS, bricked it three years ago, got another phone, recently checked it out again, and couldn't download LineageOS for it anymore. Luckily, MicroG still had a ROM for it, and now it works fine, but I'd've preferred the pure LOS version, as it runs Android 7, on which Google Play Services is not an absolute necessity (with Android 8, you need it to get push notifications). I believe I can still get the source code for it and compile it myself, but I've never done that for an Android ROM before, and I'm not particularly keen on trying that out now. My point being: Your devices could, in theory, live forever, but the files for it (ROMs and drivers) may not always be available, and knowing the internet, won't. In my field (industrial IT), it's not uncommon to still have PCs running on Intel Core2 systems, but more and more vendors are dropping the product pages and driver files for them. Pentium 4s are also still being used, but good luck finding drivers for them.
- spookthesunset 7y agoLife pro tip: make sure you are only paying the ISP for the bandwidth you can actually consume. Don’t pay for 600mbps when you can’t even use that speed. Comcast was more than happy to charge me for a half gigabit for several years. All the while the modem I was renting from them only supported like 200mbit.
- odiroot 7y agoInteresting, I have a router with exactly the same chip. 5GHz is okay but flashing anything other than official firmware breaks the 2.4GHz. Suddenly all of my ESP8266 are disconnected. My Brother printer also cannot reach the WiFi.
- yepguy 7y agoThey switched to ath10k-ct[1], a patched version of the ath10k driver and firmware. If you run into issues I think you can use the package manager to switch back. [1]: https://github.com/greearb/ath10k-ct https://github.com/greearb/ath10k-ct
- amq 7y agoI'm running 19.07 since the first release candidate on Ubiquiti gear, no issues so far, with uptimes of weeks.
- raphattack 7y agoSo does openwrt replace the edgeos on Ubiquiti gear? Trying to understand the advantages of this over the os it comes with.
- 1996 7y agoFree software with full control
- tyingq 7y agoI'd read about any caveats first. The EdgeRouter, for example, has Cavium hardware offload that requires a proprietary kernel module. It's much slower without that.
- 1996 7y agoFull control means you can recompile the kernel to match the proprietary module version, or try to reverse it. I should know ; I have a HW accelerated NIC too. Works wonder until the max speed of my optic fiber.
- ptsneves 7y agoAs ubiquiti is the apple of routers and they do have very good routers and software, what is the motivation for putting openwrt?
- fignews 7y agoRun OpenWRT on some Edgerouter Xs in my house and for me it’s consistency of the interface/configuration between all of my network devices and also full control. Runs OpenWRT quite well.
- IntelMiner 7y agoHow hard is it to get devices included into OpenWRT's Table of Hardware, or official releases? I have an End-Of-Life'd SG-1000 from PFsense developer NetGate https://www.netgate.com/solutions/pfsense/sg-1000.html https://www.netgate.com/solutions/pfsense/sg-1000.html The thing no longer gets updates as of October 2019 and was never particularly well supported, but feels like an absolutely perfect OpenWRT target I've poked at it on and off with regard to getting Linux running, as it seems to be heavily based off a standard, old Ti SoC "evaluation board" and it /mostly/ works The problem I've run into though with the upstream kernel is the ethernet NIC's appear to be linked. If you unplug either interface, they both stop responding until they are both reconnected to active devices. I'm not well-versed enough with ARM DeviceTree to figure out what the issue is, nor do I want to buy the Ti hardware SDK to test it with The old 4.4.3-yocto files Netgate sent me do appear to work with it, and the DeviceTree even works up to 4.19-LTS with minimal modification https://intelminer.com/pflin.zip https://intelminer.com/pflin.zip
- softblush 7y agoMaybe it would be easier to get help when you ask this on the OpenWRT mailing list or IRC https://openwrt.org/contact https://openwrt.org/contact
- moomin 7y agoIt might be, but most people’s experience of mailing lists involves them getting their head blown off for daring to ask a question without three year’s solid experience in the area. (I have no idea if OpenWRT in particular is like this, but there’s enough out there that people don’t make them their first port of call.)
- m4rtink 7y agoI have seen pretty much the oposite - very very few if any MLs I have seen react the way you describe.
- ptsneves 7y agoI think it might be you get your head blown, but only if you demand help and start denigrating a project because it should support this and that. I actually found very good behavior in mailing lists to very outright rude or careless questions. To the point that I think such question or remarks in real life would constitute very unnecessary behavior.
- daneel_w 7y agoInteresting bug observed in 19.07 by users of some routers: the unit will perpetually boot into failsafe mode despite not being triggered to do so. Recompiling with the failsafe module removed from the build solves the problem, but exposes what is possibly the root cause - configuration changes remain only as long as the router is powered on despite being saved, nothing persists through a reboot of the router, and the unit will always start up with the default config. I had to test it on my (deprecated) Netgear EX2700 and could confirm the exact same problem. Other than the lack of configuration persistence, 19.07 performs just great and I was pleased with many of the new features and changes. Unfortunately I'll have to stick with 18.06.6 as I have power outtages every now and then.
- sam42 7y agoSounds like this known issue, mentioned in the release notes: Images for some device became too big to support a persistent overlay, causing such models to lose configuration after a reboot. If you experience this problem, please report the affected device in the forum and consider downgrading to OpenWrt 18.06 or using the Image Builder to pack a smaller custom image.
- blocktrron 7y agoThis sounds like the Flag for the buttons GPIO is wrong (ACTIVE_LOW instead of ACTIVE_HIGH / vice versa). This was unnoticed for a long time until a rewrite of the button handling. If you are confident building your own image, try to inverse the button state here and test it out / send a patch: https://github.com/openwrt/openwrt/blob/master/target/linux/ramips/dts/mt7620a_netgear_ex2700_wn3000rp-v3.dtsi#L23 https://github.com/openwrt/openwrt/blob/master/target/linux/...
- GiorgioG 7y agoI’ve been disappointed with every consumer grade router out there. Countless bugs from annoying hiccups to a daily reboot. I feel like I’ve replaced my router every couple of years, never spending less than $150, up to $250. Finally I splurged for a UniFi Dream Machine a couple of months ago and I could not be happier. Nothing against the OpenWrt folks of course, but the reason these projects exist is the router vendors just suck. I won’t give them any more of my $ (Linksys, Netgear, ASUS in my case.)
- Youden 7y agoI generally agree but I'm heading back from a trip to Russia and I was surprised by how good Keenetic's [0] equipment was. It's a brand that apparently only operates in Russia, Ukraine and Turkey. I was impressed because of how clean and workable the stock web UI is, as well as how many features it has. They have some of the more obscure normal things like IGMP proxying (with a very user-friendly UI for configuring it) but what really impressed me was that it even had WireGuard support as an official installable package. I'll stick with my UBNT gear at home but still, for a consumer brand Keenetic is pretty nice. [0]: https://keenetic.com/global https://keenetic.com/global
- jotm 7y agoMikroTik, too, but last time I checked the UI was pretty bad. Good hardware, reliability and features, though.
- ice3 7y agoAFAIK (some?) MikroTik hardware runs Openwrt quite well. I remember running Openwrt on an old Mikrotik routerBoard without any issues.
- nobodyshere 7y agoI've just installed openwrt on mikrotik hap ac router. Damn that thing is nice. The UI is way more user friendly and expandable. Built-in pi-hole analog (adblock) works just fine, wpa3 support is also there. And all that is installed in just a few clicks.
- eddyg 7y agoIt’s worth noting that OpenWRT doesn’t just run on “embedded”/“dedicated” OEM router hardware: it works great on any x86-based system (often sold as “pfSense” boxes, etc.) as well and offers a lot of great functionality.
- Dunedan 7y agopfSense is a completely different product and not related to OpenWrt at all. It even isn't based on Linux, but on FreeBSD.
- kn0where 7y agoYes, but the parent is just saying that x86 based hardware that sells itself as being a “pfSense box” also runs OpenWRT.
- auxym 7y agoI assume GP is aware of that, and from what I understand, he is pointing out that OpenWRT also happens to run great on various x86 hardware/SBCs sold as "pfsense boxes".
- klingonopera 7y agoI was thinking of trying this out, but I imagine, with VDSL(2), there aren't any significant latency bonuses when doing it. There are way to few VDSL2 PCI-E cards available, if at all. Edit: ...or does VDSL2 run with the ethernet protocol and just needs a standard nic? The VLAN ID tag makes me think so, but the GDMT993.5 (Vectoring) tells me it could be something more...
- keeperofdakeys 7y agoVDSL needs its own NIC, as it operates very differently to ethernet. Recently I discovered that my telephone line was operating on one wire, but VDSL was still operating in a degraded fashion. Suffice to say this would totally prevent ethernet from working. ADSL could only encapsulate ATM frames (hence using PPPoA), VDSL includes a new mode called PTM that can encapsulate ethernet frames. This may be what you were reading about.
- nolok 7y agoWhile we're on an OpenWrt thread: what's the best way if any to get a view of "who's using the bandwidth right now" on it ? Not the process, not the remote host, not the monthly agreggate, but which connected device wifi or lan is using what, total or by host. (use case; figuring out whose phone/laptop/tablet/tv/whatever is suddenly eating all the bandwidth in my home from time to time) I'm using 18.06.05. A nice view in LuCI would be perfect but something that need to ssh is fine too.
- gsich 7y agontopng. It doesn't run on OpenWrt though. I have tried, but you have troubles compiling it and resource constraints depending on the device. Might be lucky if you have ARM and enough space. But I have long searched for something similar. The answers were mostly useless e.g. most if not all were for the combined bandwidth. I now run ntopng on another x86 device and use port mirroring to capture the traffic that goes through the OpenWrt device.
- nolok 7y agoSounds / looks like it's exactly it. What kind of resource needs are we talking about here ? The router I use at home is a R6220 (OpenWrt description "It comes with a large 128 MB NAND ROM with space for many packages and a single core (dual thread) MIPS CPU powered by 128 MB RAM"), do you reckon there is a chance for it to run there ?
- gsich 7y agoIf you manage to compile it ... maybe. If you do, please post on how you did it.
- kim0 7y agobandwidthd did that job for me!
- nolok 7y agoDoes it have an instant view (or a way to refresh it at current data) ?
- h2odragon 7y agoNot that I've tried to make it do anything fancy, but I've been using it since the -rc1 and it has been flawless for me. Just posted about it http://snafuhall.com/home-lan-2-openwrt-router.html http://snafuhall.com/home-lan-2-openwrt-router.html I really appreciate the effort the OpenWRT folks have put in to collecting useful snippets of documentation for odd cases and uses. Sure it might could be better organized but it's there at least.
- est31 7y agoGot WPA3 working with it, yaay! https://gist.github.com/est31/d92d17acbb4ea152296f9b38764cd791#gistcomment-3134561 https://gist.github.com/est31/d92d17acbb4ea152296f9b38764cd7...
- flas9sd 7y agoto encourage others.. wpa3 for me was install of one package (opkg install --force-overwrite hostapd-openssl) and changing one config line (encryption = 'sae'). Client had no issue connecting (wpa_supplicant 2.9 on ubuntu 19.10, though only nmcli shows the connection as wpa3). The various dragonblood attacks are mitigated in current hostapd if I'm not mistaken.
- est31 7y agoIf you only have WPA3-capable devices on your network, setting encryption=sae is fine. I have to support WPA3 incapable devices and thus need to use the sae-mixed option (also the wpa_supplicant patch I use requires wpa2-psk support).
- ncmncm 7y agoNothing is very clear, but I get the impression that: - targets labeled "ar71xx" can only use the old driver, and will probably not be supported in future releases. Consider replacing such equipment. - targets labeled "ath79" have already been ported (or started out?) with the new driver, and owners may ignore the whole topic. - targets labeled "ar71xx-to-ath79" have a commitment for support for the new driver, so that all future releases should work with this hardware (even though this latest release still uses the old driver). Can somebody confirm whether this is an accurate understanding? I have tp-link AC1750v5 routers, identified with the third bullet above. Can I ignore this, or do I have to do something to switch it to the new driver?
- jibiji 7y agoThere is no driver change, only changes in the way the device is supported by the kernel (mach files in ar71xx, Device Tree in ath79) The "ar71xx-ath79" target is used in the wiki for devices that are supported both in ar71xx and ath79, there should be 19.07.0 images for both. In any case, use ath79 for new devices, and migrate from ar71xx to ath79 on existing devices. There is a guide here: https://openwrt.org/docs/guide-user/installation/ar71xx.to.ath79 https://openwrt.org/docs/guide-user/installation/ar71xx.to.a...
- ncmncm 7y agoOK, so it appears that changing to the new "driver configuration" mainly affects what names the devices have in /dev and /sys, which would make your current router configuration not work, without some active translation, first. So, when you install the new boot image, you choose which, and if you choose the ath79 one, then when you restore the configuration, something runs to translate it for the new names. Presumably, then, if everything seems to work, you make a new backup with the new settings, and everybody can forget the old names.
- ncmncm 7y agoWhat is this about a LEDE / openwrt fork? Should I be looking at LEDE instead? What about the FreeWRT fork? Is it alive / lively / up-to-date / running ahead?
- dddddaviddddd 7y agoLEDE merged back into OpenWRT https://en.m.wikipedia.org/wiki/OpenWrt#History https://en.m.wikipedia.org/wiki/OpenWrt#History
- manuelmagic 7y agoThere was a time when I had the free time to install dd-wrt on a brand "new" Linksys WRT54G and fiddle with tons of features but today I'm completely satisfied by my FRITZ!Box(1) that requires near zero active maintenance. I don't get thousand of features, but all the ones I need at home. I'm honestly curious: why do you guys use OpenWRT, dd-wrt, tomato etc.? Re-using old hardware? Flashing bugged cheap routers that work bad with official firmware (that's never going to be fixed probably)? Need a specific feature not normally available on home net devices? Just enthusiast about the project or simply enjoying the hacking? (1) I spent a few euros more on it than the typical home network appliances but I gained them back in quality, reliability, active support and development: no crappy hardware, no bugged software and zero issue with my 15+ WiFi devices in my house in a year.
- nickysielicki 7y agoI updated my router to this release today. Then I setup: 1. DNS over HTTPS to cloudflare so that my DNS doesn't leak. 2. Hurricane Electric's tunnelbroker, so that I can access the IPv6 web. 3. Dynamic DNS so that I can address my home connection anywhere, even if my IP changes. 4. Wiregaurd so that I can access everything on my home network. I tend to agree that most people should just buy Ubiquiti SOHO gear and be done with it, but at least for me, this is cheaper and a bit more fun.
- Trias11 7y agoFor #3 I use ZeroTier (but this of course won't let me access fridge of coffee machine remotely because i can't install ZT on them :) ) but anything else goes, especially #4 WireGuard.
- mindslight 7y agoI similarly wanted lower hassle, but went in a different direction of just moving routing back to a full amd64 box running Debian. Now all tinkering is standard configuration, will cleanly carry across upgrades, and lives in git. I still use OpenWRT/DD-WRT on a few standalone access points, because I'd rather have a standard webui than dealing with manufacturer idiosyncrasies. Although when it's upgrade time I'll be tempted to move further in the amd64/hostapd direction.
- josteink 7y agoOpenWRT is great. This release brings all devices up to the same (mostly) unpatched Linux kernel, 4.14. For the popular Tp-link Archer C7 routers (and family?) you finally get soft off-loading with the new ath79 device-tree, meaning the device can now handle routing 600mbps+ where it before would only route 350mbps+. That’s massive! The new client-side GUI is noticeably snappier on slow routers. I’ve already upgraded all the 5 units I have in my home network, and I’m feeling it. I’ve kept settings despite recommendations against doing so, and I’ve had zero problems. Super-smooth! Props to the team and everyone involved. Despite their modesty this was quite a release!
- mikepurvis 7y agoI have an old C7v2 to that was the basis of my household's network until I upgraded to an EdgeRouter + Unifi APs. The C7 was fine for a while but in the end got extremely unreliable, even in partial roles as only a router (with wifi disabled) and then later as only a an AP (with the DHCP server disabled). Currently it's unplugged because any time it was turned on, devices would roam to it and get stuck there with no connectivity. I should try upgrading it to the latest OpenWRT and see if things are any better.
- rshnotsecure 7y agoHow does everyone feel about the security of OpenWRT? vs Tomato? What about say configuring my own OpenBSD server to act as a router? I am out of my intellectual depth here but I feel like that would be more secure than Linux in general if we are going for max security. As governments and private equity groups continue to buy out whatever hosting provider, VPN, Registrar, etc they can find...I feel like Open Source is a pretty soft target in the grand scheme of things. I am trying to become somewhat ruthless in analyzing my dependencies when it comes to software. NOTE: another commenter mentioned a TP-Link product. Those devices are absolutely insecure to the core of their firmware for the time being. 7 days ago I discovered their completely open production Elasticsearch API server for their entire camera and IOT platform in the United States. It has now been remediated but that event puts under suspicion anything else the company deals with via the TP-Link brand out of Shenzhen.
- jt_snacks 7y agoAny of the major distributions focused on simplicity and routing that also receive regular security updates should meet your needs. A Google Wifi setup (with it's automatic updates) is probably better for privacy and security than the TP-Link. Better still would be pfsense, vyatta. Personally, I use an ER-X running a minor vyatta fork and it's rock solid.
- mongol 7y agoInteresting idea. I briefly searched for Ansible + OpenBSD + router and found some interesting links. Need to look into it. I was thinking to do this with Linux but for this purpose, OpenBSD could be better? But it was very long ago I last used OpenBSD.
- 1MachineElf 7y agoI was able to accomplish this with OpenBSD in 2016 by simply using the official docs. With Linux you'd be googling around for WireGuard, etc.
- josteink 7y ago> another commenter mentioned a TP-Link product. That may have been me. > Those devices are absolutely insecure to the core of their firmware for the time being. Which is why you replace that firmware with OpenWRT, right?
- darkwater 7y agoSooo... if I want to move my VPN (WireGuard) termination from my Raspbian to a more dedicated device like a royter, what are the option at a reasonable price (say, 100$ or €, as I am european) and reasonable power? Better if with integrated wifi controller and antennae. And which distribution besides OpenWRT? Thanks!
- deleted 7y ago[deleted]