3 ms·
The cycles for air liquefaction and separation are highly optimized, but the basic idea is to compress air, cool the compressed air back toward room temperature
by pfdietz 7y ago
The cycles for air liquefaction and separation are highly optimized, but the basic idea is to compress air, cool the compressed air back toward room temperature, then send it through an expander (a turbine, say), converting much of its remaining thermal energy to work. This leaves the expanded gas colder than when you started.
- hinkley 7y agoOkay. So it's a multi-step process that starts with a compressor but contains a regeneration phase.
- nine_k 7y agoYou can recuperate some of these losses by cooling the next portion of the incoming air with the cold of the expanded gas.
- aurizon 7y agoThat is what they call multiple stage condensation/evaporation - gains efficiency, but Carnot still wins.
- jp57 7y agoI think in computing the efficiency, the comment above may have been to the work generated in cooling the air, but not the work generated from the boiling of the liquid air. Also, I wonder if separation is necessary in the application referred to in the OP, since they're not trying to purify liquid nitrogen, but just store energy in the temperature differential. If they're just going to boil it back off again, they might not care about removing impurities.
- aurizon 7y agoIt is a heat engine, forward and reverse = Carnot rules. https://energyeducation.ca/encyclopedia/Carnot_efficiency https://energyeducation.ca/encyclopedia/Carnot_efficiency. He essentiallt states that you can only get a certain maximum % out of exnapsnio engines if you expand them to absolute zero in a vacuum. Since you expand to room temperature and pressure, the equation determines that efficiency. That is why car engines are 35% or efficient. Specialized constant speed diesels a bit better and turbines close to 60%