5 ms·

What exactly is this seamless pairing that Airpods do so much better than everyone else? I've not noticed much in the way of seams on the other wireless earbuds

by ikeboy 7y ago

What exactly is this seamless pairing that Airpods do so much better than everyone else? I've not noticed much in the way of seams on the other wireless earbuds I've tried. Connect on device, it works, and autoconnects next time.

wrboyce 7y ago
You can think of the AirPods being paired to your iCloud account, and connecting to any authenticated devices is generally seamless and very quick.
- damnyou 7y ago
  So, not seamless if you use Android, Windows, Linux, a Mac laptop and an iPad like I do.
  - wrboyce 7y ago
    It would be seamless between the Mac and iPad… I'm unsure how you would expect Apple to achieve it on devices they do not control though?
    - damnyou 7y ago
      Create a standard. Release it as royalty free. Contribute implementations to open source. The way it's been done for decades.
distantaidenn 7y ago
I've used quite a few wireless headphones/buds, and have yet to see anything as smooth as connecting a new pair of Airpods to an iPhone. The process takes about 2 seconds, and 1 second of that is you opening the lid to the charging case.
filoleg 7y ago
Have you tried using any of them with multiple devices? Not at the same time, obviously, but in scenarios like "listening to them connected to phone while on the bus, getting into your office, switching to listening to them on your laptop". If not, I recommend you testing out this specific scenario. For a lot of the ones I tested, it becomes an exercise in patience and frustration. There were even some that refused to pair with more than one device at a time at all, meaning that every time you switch a device, you have to do the whole pairing process again. And that wasn't 10 years ago, i tested this less than 2 years ago. And even the whole pairing process is annoying. Best case scenario, you can just pair them using the standard bluetooth settings on your phone. Worst case, you have to deal with some custom app (that you have to install on your phone) and do the steps from there (looking at you, Sony; I love your WH-1000XM over the head line of headphones, but ffs this is just bad UX). Contrast it with AirPods, where you just need to open the case and put them close to your iPhone. You do it once and then completely forget about having to do this ever again. P.S. if your other device is an Apple one as well, it gets even more seamless. You don't need to pair it in that case, you just switch the audio output device on your macbook from speakers to airpods, which are already present on the list of audio devices (as long as you paired it with another apple device of yours first).
- ikeboy 7y ago
  I've been switching between my Ubuntu laptop and Android phone. Pretty simple, I do need to disconnect it manually on one device before switching to the other but that takes a second. I don't believe Airpods would be any better in that scenario.
  - mikestew 7y ago
    I do need to disconnect it manually on one device before switching to the other but that takes a second. Only a second if your kids don’t have it, or you didn’t leave it at home, or... With AirPods, one does not need track down the other device.
    - ikeboy 7y ago
iudqnolq 7y ago
The difficulty is when headsets are paired with two devices at the same place, eg phone & laptop. In the <$80 Android wireless headset market, at least, everyone requires that you disconnect from one device and then manually connect to the other. That means power cycling the headsets or disabling Bluetooth on the device they were connected to. I believe there are higher end non Apple devices that have solved this.
- ChainOfFools 7y ago
  I can't concur on this at all; I have a 59 dollar LG in ear Bluetooth stereo headset that easily and seamlessly auto connects to at least 3 different devices, two Android and one Apple. Multiple Bluetooth earpieces (of the single ear kind) from jawbone and Plantronics, though not nearly as cheap, have been similarly painless and this has been the case for at least 5 years, since Galaxy Note 2 days. I would never have guessed this was even a pain point that needed solving.
  - mikestew 7y ago
    Much like how my Apple cables outlive everyone else’s (I still have working 30-pins), someone is going to have a good experience with BT audio and switching from one device to another. But I know other people have longevity problems with their cables, and if you didn’t know before, you know now that people have these problems with Bluetooth. I, for example, have used BT audio almost since it was a thing. I generally don’t buy cheap shit, but I’ve had the same problems others complain about across multiple devices and audio gear. I’m glad it’s worked well for you, though. I figured someone must being a good experience with it.
- ikeboy 7y ago
  My $50 funcl AI would disconnect if you touch the right earbud for a few seconds, and you could then connect on the other device. But that died a few months in.
- btgeekboy 7y ago
  There are. Bose hardware (both the QC35II and SoundSport headset I've tried) handle this beautifully. They've also had audio sharing between multiple headsets working for years, which my partner and I have used numerous times while traveling.
baby 7y ago
Actually my bose have the best pairing experience I’ve had so far. I flip a switch, it tells me I can connect a new device, then I select my bose with my device. I can even have my bose connected to several devices at the same time.

by ikeboy 7y ago

wrboyce 7y ago

You can think of the AirPods being paired to your iCloud account, and connecting to any authenticated devices is generally seamless and very quick.

damnyou 7y ago
So, not seamless if you use Android, Windows, Linux, a Mac laptop and an iPad like I do.
- wrboyce 7y ago
  It would be seamless between the Mac and iPad… I'm unsure how you would expect Apple to achieve it on devices they do not control though?
  - damnyou 7y ago
    Create a standard. Release it as royalty free. Contribute implementations to open source. The way it's been done for decades.

distantaidenn 7y ago

I've used quite a few wireless headphones/buds, and have yet to see anything as smooth as connecting a new pair of Airpods to an iPhone. The process takes about 2 seconds, and 1 second of that is you opening the lid to the charging case.

filoleg 7y ago

Have you tried using any of them with multiple devices? Not at the same time, obviously, but in scenarios like "listening to them connected to phone while on the bus, getting into your office, switching to listening to them on your laptop". If not, I recommend you testing out this specific scenario. For a lot of the ones I tested, it becomes an exercise in patience and frustration. There were even some that refused to pair with more than one device at a time at all, meaning that every time you switch a device, you have to do the whole pairing process again. And that wasn't 10 years ago, i tested this less than 2 years ago. And even the whole pairing process is annoying. Best case scenario, you can just pair them using the standard bluetooth settings on your phone. Worst case, you have to deal with some custom app (that you have to install on your phone) and do the steps from there (looking at you, Sony; I love your WH-1000XM over the head line of headphones, but ffs this is just bad UX). Contrast it with AirPods, where you just need to open the case and put them close to your iPhone. You do it once and then completely forget about having to do this ever again. P.S. if your other device is an Apple one as well, it gets even more seamless. You don't need to pair it in that case, you just switch the audio output device on your macbook from speakers to airpods, which are already present on the list of audio devices (as long as you paired it with another apple device of yours first).

ikeboy 7y ago
I've been switching between my Ubuntu laptop and Android phone. Pretty simple, I do need to disconnect it manually on one device before switching to the other but that takes a second. I don't believe Airpods would be any better in that scenario.
- mikestew 7y ago
  I do need to disconnect it manually on one device before switching to the other but that takes a second. Only a second if your kids don’t have it, or you didn’t leave it at home, or... With AirPods, one does not need track down the other device.
  - ikeboy 7y ago

iudqnolq 7y ago

The difficulty is when headsets are paired with two devices at the same place, eg phone & laptop. In the <$80 Android wireless headset market, at least, everyone requires that you disconnect from one device and then manually connect to the other. That means power cycling the headsets or disabling Bluetooth on the device they were connected to. I believe there are higher end non Apple devices that have solved this.

ChainOfFools 7y ago
I can't concur on this at all; I have a 59 dollar LG in ear Bluetooth stereo headset that easily and seamlessly auto connects to at least 3 different devices, two Android and one Apple. Multiple Bluetooth earpieces (of the single ear kind) from jawbone and Plantronics, though not nearly as cheap, have been similarly painless and this has been the case for at least 5 years, since Galaxy Note 2 days. I would never have guessed this was even a pain point that needed solving.
- mikestew 7y ago
  Much like how my Apple cables outlive everyone else’s (I still have working 30-pins), someone is going to have a good experience with BT audio and switching from one device to another. But I know other people have longevity problems with their cables, and if you didn’t know before, you know now that people have these problems with Bluetooth. I, for example, have used BT audio almost since it was a thing. I generally don’t buy cheap shit, but I’ve had the same problems others complain about across multiple devices and audio gear. I’m glad it’s worked well for you, though. I figured someone must being a good experience with it.
ikeboy 7y ago
My $50 funcl AI would disconnect if you touch the right earbud for a few seconds, and you could then connect on the other device. But that died a few months in.
btgeekboy 7y ago
There are. Bose hardware (both the QC35II and SoundSport headset I've tried) handle this beautifully. They've also had audio sharing between multiple headsets working for years, which my partner and I have used numerous times while traveling.

baby 7y ago

Actually my bose have the best pairing experience I’ve had so far. I flip a switch, it tells me I can connect a new device, then I select my bose with my device. I can even have my bose connected to several devices at the same time.