11 ms·

Recover HD Using a Magnet

270 points by lrizzo 7y ago

tyingq 7y ago
If you Google for the word "sticktion" or "stiction" you'll find other remedies. Like putting it in a ziplock bag and freezing it, or (youch) purposefully dropping it. All approaches to release a head that's stuck to a platter.
azinman2 7y ago
How did the data not get destroyed by the magnet?
- aewens 7y ago
  Yeah, this technique should really only be used if, and only if, you need the drive itself to be fixed and no longer care about the contents of the drive (e.g. if it was in a RAID 1 and manually cleared afterwards).
- ebg13 7y ago
  There are actually very powerful permanent magnets inside of every spinning hard drive already, so clearly there's more to destroying data than just having a magnet nearby. https://www.kjmagnetics.com/blog.asp?p=hard-drive-destruction https://www.kjmagnetics.com/blog.asp?p=hard-drive-destructio... has a writeup about trying and failing to wipe a drive with extremely powerful magnets.
  - gist 7y ago
    You know what is sad about a small business (kjmagnetics.com) that you linked to? They are exactly what will be killed off by Amazon. The small and knowledgeable specialty store very similar as I am sure many of us remembered happened to 'Stereo Stores' once the big boxes stores came along (or hardware stores). Nothing new about this of course just that with Amazon it's greatly accelerated.
    - cowsandmilk 7y ago
      Amazon is 8 years older than K&J Magnetics...but sure
      - gist 7y ago
        What does that have to do with the point that I am making? Did I make say it started before Amazon?
  - bradknowles 7y ago
    There are degaussing devices that look like microwave ovens, and for all I know, that might be largely how they operate. But outside of those, no magnet that you can hold in your hand will demagnetize a modern hard drive at any distance outside of the case, because there are magnets inside the case that are stronger than you can hold in your hands, and they’re used to move the head/arm assembly at mind-blowing speeds — and accuracy. I have some old Imprimis Wren VII hard drive magnets still on my dad’s fridge, from the time when I did an internship there in 1989. I won’t say that you can’t remove them from the fridge, but they are stuck on there extremely well, and there are a number of people who had been injured by having their hand or fingers caught between those magnets and a ferrous metal object — like a fridge. And that was 1989. The magnets they use now are much stronger. Now, if you happened to put a hard drive inside an MRI machine, that would do the job. But then you’re also talking about a machine that could suck up a vacuum cleaner from across the room and turn it into a lethal projectile. A proper degausser will be a lot weaker than an MRI machine.
- mirimir 7y ago
  It's changing magnetic fields that wipe HDDs. Such as powerful electromagnets. In a clean (enough) room, they could have opened the drive, and just poked the actuator arm. Decades ago, I had a HDD that wouldn't spin up unless I nudged the platter with a pencil erasor. Very near the center, of course. There was a hole in the case, in just the right place, with Al tape over it.
  - pontifier 7y ago
    Doesn't even have to be a very clean room... I played around with an old 1 gig drive years ago. My friends and I opened up the case so we could watch the drive doing it's thing. We did a fresh os install and watched as it formatted the disk and copied files. The head was remarkably strong, and would move so fast it looked like it was in 2 places at once while copying files. It was fun to stick a screwdriver between the 2 ghostly write arms, and have the screwdriver almost knocked from your hand, while the drive went on like nothing had happened. It ran for weeks before it died. I've also stuck a 3 1/4" floppy disk to a huge 2"x2"x5" neodimium magnet with no ill effects. The drive was able to read it fine afterwards with the same md5 hash of the contents.
    - commandlinefan 7y ago
      If you videoed any of that, I'd love to watch it on youtube (or somewhere).
    - gist 7y ago
      That's pretty cool. I had a few old drives and on purpose took them apart. So far I was not able to duplicate what you were able to do (this was last month). I had an idea that it might work in some way. Glad that you can confirm it did at least when you tried.
    - 4ad 7y ago
      My first HDD has a 540MB drive, I ran DOS. Eventually I upgraded to newer computers, and I opened the old drive, and put in on the wall on display. It stood there for at least a decade, possible 15 years, before I moved to a different country. Before leaving, I decided to connect the old drive to a computer, just for kicks. Remarkably, I could read data off it. Not much, file i/o mostly ended up in failure, but I could at least see the file structure. I did not expect this.
- cecja 7y ago
  the whole magnet and hard drives thing is a really old hoax. with normal household magnets or even strong neodym magnets nothing will happen to your data but if you have a really strong industrial electro magnet at hand you can wipe a drive with it... here is an old national geographics video on the topic https://www.youtube.com/watch?v=U8LWTe5CqQg https://www.youtube.com/watch?v=U8LWTe5CqQg
  - EvanAnderson 7y ago
    Here's my anecdote: In 2006, while sitting at my desk playing a video on the Travelstar 40GB PATA drive in my Thinkpad T22, I held a single neodymium magnet (harvested from an old hard disk drive) about 6 inches from the left side of the unit (where the ~disk was located). The video froze, Windows XP blue-screened, and the hard disk drive started emitting a ~10Khz whine. I jerked my hand away from the PC immediately when the whine started BIOS would no longer detect the disk on that machine, or any other I tried it on (on both USB-to-PATA and honest-to-goodness motherboard PATA controllers). The drive spun up but made a repeated ticking sound (I assume seeking back and forth looking for servo tracks). I sent the drive to Kroll Ontrack (because, stupidly, I had billing data that wasn't backed-up on the drive). The report I received back indicated that 80% of the drive's sectors were unreadable. As an aside: The data I was looking for was ASCII text and Kroll Ontrack was completely unhelpful in just sending me a bitstream image of the drive so I could grovel thru looking for data I needed. Being plain ASCII, their "file carving" tools didn't locate any of the data. (They sent me a "preview" of the data they'd located, and while it got lots of Microsoft Office-format files, it didn't have any ASCII text files). I offered them a 3x multiple of the rate they asked for file-level recovery to simply send me the bitstream image of the disk that they'd already made. They wouldn't do it, and wouldn't even let me pay to talk to somebody who understood what I was asking for. I ended up taking a major loss on the billing data I destroyed. I'll never recommend them to anybody. I won't ever play with neodymium magnets around spinning rust media again either. I also had a major failure of my discipline re: backup at that time, too. The cobbler's children always go barefoot-- I was being too cavalier with my backup strategy (or lack thereof) and not treating my own data like I would a Customer's.
    - 7y ago
dukoid 7y ago
Don't use dd -- use ddrescue (reads all "working" sectors before retrying broken ones).
- ddtaylor 7y ago
  Does this mean it puts less strain on a potentially broken disk in an attempt to maximize how much can be rescued before it fails?
  - askvictor 7y ago
    yep; it's quite clever about how it deals with broken sectors too; starts jumping over them in increasingly large amounts, and goes back later (in multi-pass) to get the missing bits.
  - segfaultbuserr 7y ago
    Yes. There is also a related technique used for RAID rebuilding - SCT Error Recovery Control [0] (Western Digital's name is Time-Limited Error Recovery). The main idea is to limit the maximum time allowed during a hard drive's attempt to recover from a read/write error. Without such a limitation, when the hard drive encounters a failure, it may try rereading and remapping a bad sector and becomes temporarily unresponsive, making the RAID controller to believe that the entire hard drive has failed, and potentially put more strain on the existing disk in an unnecessary full rebuild. [0] https://en.wikipedia.org/wiki/Error_recovery_control https://en.wikipedia.org/wiki/Error_recovery_control
- Kenji 7y ago
  Agreed. ddrescue is great, I used it to rescue a disk with bad sectors.
rgj 7y ago
My anecdote: Around 1993 I had a Commodore Amiga with an A590 external hard drive. A big enclosure that could be connected to the expansion port on the left of an Amiga 500, containing a very precious 20MB hard disk. One day, it stopped working. I tried everything but I couldn’t get it to work. A friend offered to take a look at it so I put it in my backpack and took the train to my friend. When connected to his A500, the drive worked lime a charm. When I drove back home in the train I wondered what would be the matter with my A500 since it apparently made my A590 hard drive fail. However, once I got home and reconnected the drive, it worked. No problem whatsoever. Until two days later. It failed. You know what’s going to happen, right? Took it to my friend, it worked, took it back and it worked for two more days. Turns out that disconnecting it, putting it in my bag, walking it around for a while worked just as well. Turns out that disconnecting it, dropping it from 5cm / 2 inches and reconnecting it, worked just as well. Which was what I did for the next four years or so. Whenever it stopped working, I disconnected it, dropped it and reconnected it. Always loved the look on the face of people who witnessed me starting up my Amiga.
- michaelcampbell 7y ago
  "sticktion" was an issue with some early Mac drives.
  - bradknowles 7y ago
    In 1989, I did an internship with Imprimis, which was later sold to Seagate. I worked in the Manufacturing Engineering group, and specifically with the Engineers behind the “Wren” line of hard drives. IIRC, up to the Wren V, they had problems with the lubricant sometimes overheating and leaking out of the spindle onto the platters. When the hard drive spun down, the heads would be glued to the media by the lubricant, thus resulting in stiction. They developed a “thermalwriter“ test process for the drives to put them through heat conditions way beyond what they might experience in the field, and then developed lubricants that could withstand the heat. They were very proud of this process. But there were still lots of old drives out there. One of the things the clean room would sometimes do is take hard drives from important clients and try to recover them. I saw a lot of nasty failures, many of which were a result of inappropriate techniques being applied to try to temporarily free the heads. There was a lot of FUD at the time on what would later be called “The Internet”, so one of my first contributions to the community was to take the knowledge of the engineers at the company and developed a FAQ that I posted to the various USENET newsgroups, on the right — and wrong — ways to try to address this issue in the field. Sometimes I wonder if that FAQ ever survived.
sdfjkl 7y ago
I've fixed this problem a few times (on different drives) by giving the drive a not so gentle thwack with a hammer. The trick is to hit it on the long side, which tends to dislodge the stuck heads/arm. If you hit it on the top or bottom, you're likely to break something, and hits on the short side aren't likely to achieve anything at all.
- pmiller2 7y ago
  I've used this method after the fridge/freezer method failed. It seems less likely to cause data loss than using a magnet to move the head as in the article.
- LIV2 7y ago
  Many jobs ago we had an outage caused by 2 drive failures in a Raid 5 system, that was resolved by banging the drives on the ground a couple of times before putting them back in. If I still worked with physical servers I'd be carrying around a rubber mallet to apply "percussive maintenance"
jacquesm 7y ago
Clever! I'm stuck on a problem right now as well, I'm trying to boot an old server (Supermicro, dual CPU) to verify something and for the life of me I can't figure out what is wrong with it. It doesn't do anything when you power it up, even the power led on the board doesn't light up. Forcing the powersupply to 'on' does light up the LED but the system still won't boot. Already put a fresh 3V cell in it, stripped it down to the bare minimum, all jumpers in default positions, no go. And it worked perfectly fine the last time it was shut down. Highly frustrating these gremlins.
- lallysingh 7y ago
  Check your IDE cables
  - jacquesm 7y ago
    SCSI system, already pulled the controller out and disconnected the backplane. Really weird this one. But thank you for the suggestion. In fact, that's the whole reason I want to boot it, the drives are a hardware raid which is hard to port to a machine where the controller won't fit.
- lallysingh 7y ago
  Oh, did any caps blow? There were some counterfeit ones going around some time ago...
  - jacquesm 7y ago
    That's a good one, did not think to check that, I'll go over all the caps on the MB.
bewilderbeast 7y ago
My story: In 1996 or 97, a friend brought me his Compaq Deskpro, the SCSI HDD had stopped working. No sound at all, dead. Tried everything, checked voltages, reconnected cables trying to clear any oxidation. Wouldn't spin at all. Well, called it a night. Next day, decided to take it out of the chassis for a last test, connected outside. Not only it spun, it worked fine!!! WTH???? Well, into the chassis it went. Nothing. Dead. Whaa..??? Outside again, it worked. In the chassis, dead. Outside, worked. Scratched my head... With it working outside, just tried to place it on top of the chassis. It spun down and stopped. Took it away, it spun up. Got it close again to the chassis, it spun down again... Scratched my head again... Gave up, left it disconnected outside for the day. Next day tried it again and this time it worked outside of and in the chassis... My thoughts? The chassis was magnetized or something... Worked for a couple more years.
- 0xcde4c3db 7y ago
  Perhaps a defect in a cable or connector such as a broken wire or a dry solder joint? These often cause problems that mysteriously appear or disappear as the cable is moved and the changing forces on the defect make and break the connection.
  - bewilderbeast 7y ago
    Nope, I tried everything, twisted the cables, etc. I even changed from power connector to another and changed SCSI cable. Outside it worked, inside didn't. Working perfectly outside, as soon it got close to the metal of the chassis it spun down, and as it got away from the metal it spun up.
glennvtx 7y ago
I have fixed a ton of drives, in general. Board replacements, swapping platters, head swaps, etc. Some takeaways: I started doing this under tupperware, and that worked. I built a "cleanroom" out of a new sandblasting cabinet, and that worked better. Later i built a laminar flow bench out of a cheap kobalt tool-box and some plexiglass, and that was better still. Swapping the control boards works on some makes (wd), make certain it is exactly the same model and revision. exactly. "close enough" never worked for me, not even once. By far just a slight "spin" by hand along the axis of travel of the disk, a quick gentile flicking motion, works to unfreeze the spindles of most stuck drives. Some drives responded to a gentle heating of the spindle bearing with the hot air. Use dd_rescue. "Spinrite" is complete horse-shit, don't listen to anyone saying otherwise. Most drives people brought in were just corruptions, photorec and it's associated programs (testdisk) are also invaluable..
- eitland 7y ago
  Do you (or anyone else) have ideas for what to do with - a MyBook that isn't recognized anymore? I've figured out there's probably some encryption in the casing because when I disassemble it and connect it directly it shows up as unformatted or something. - an ssd which seems even more dead. Personally I've gotten back erased data (photorec) and data from at least 2 other disks (tilting the disk or freezing the disk), but these two have me stumped which is sad since they broke shortly after each other and one were supposed to be the backup ;-)
  - londons_explore 7y ago
    The drive itself is likely good - it's probably a software/config error with the casing. A drive recovery company will probably be able to recover it cheaply, or third party recovery software on the bare drive.
    - eitland 7y ago
      Ok, thanks! Would you happen to know why they'd transform the data instead of just writing through? Oh: and I also added detail about another drive to my question. I didn't think anyone would answer that fast :-)
wwright 7y ago
This a fantastic webpage.
- djsumdog 7y ago
  Simple and straight to the point ... although some navigation would be helpful to see, you know, the rest of the website.
  - knolax 7y ago
    TBF from the ~luigi part of the url you can tell that it's probably one of those "web sites" allotted to each user on a university server or something similar, eg. go to http://info.iet.unipi.it/~luigi/ http://info.iet.unipi.it/~luigi/ for his homepage.
djsumdog 7y ago
I have successfully used the freezer trick a few times to recover a hard drive. It did work in those instances and I documented it here: https://battlepenguin.com/tech/freezing-a-hard-drive/ https://battlepenguin.com/tech/freezing-a-hard-drive/ If you can, leave the hard drive in the freezer while you access it. Only works for old spinny hard drives of course.
vectorEQ 7y ago
instead of magnet, what i used to do with ticking / corrupted drives was write full of 0, then write full of 1, then full of 0, repeat a few times. it takes frigging agents, but it kind of gets out all of the bumps in the magnetic material and smoothens it out again. fixed many broken drives doing that. ticking is often the read head getting dumped too much due to magnetic substance on the disk being piled up too much giving too much of a push to it. then the ticking will cause similar piles to form and get worse and worse.
- londons_explore 7y ago
  Alternative explanation: some sectors are unreadable due to checksum errors (caused by improper powerdown). Repeated read requests sounds like ticking because the head will be seeked every time. Writing all 1's or 0's to the drive causes those sectors to either be rewritten or reallocated. The fact it's 1's and 0's wouldn't have an impact anyway - all drives use data whitening techniques anyway.
unnouinceput 7y ago
Those $1.5 apparently came from a leprechaun, there is no other explanation :).
randompi 7y ago
View page source. What a beauty ️️.
- thepete2 7y ago
 Really? He doesn't close the tags.
 - wizzwizz4 7y ago
 That's only a problem for XHTML. HTML5 implicitly closes the previous tag when you open the next one; thus, a inside a is an implicit , if you will.
 - colejohnson66 7y ago
 Why does VS Code auto add the closing tag when you open them then? It doesn’t do it for, say, <img>. Bug?
 - wizzwizz4 7y ago
 Feature. tags can function as containers for text and other elements, and VS Code can't distinguish between , with the special handling, and <div>, without it. Okay, to be fair, that does sound like a bug.
 - thepete2 7y ago
 Didn't know that. Thanks :)
 - CaptainMarvel 7y ago
 That’s optional in HTML5
- glaberficken 7y ago
 Came here to post exactly the same. You CAN write human readable html!
tartoran 7y ago
I had numerous HDs fail with the clicky noise when powered up. I was never able to recover any of them. Is it possible nowadays to fix these without replacing the drive controller? I remember this clicky problem forever destroyed my trust in harddrives. Are hard drives any better these days??
throwaway3563 7y ago
The strangest HDD failure I ever dealt with was a Toshiba notebook drive where the centre bearing had become shot. The notebook would not boot and the HDD sounded like a coffee grinder. By moving the notebook in the air and trying different positions the noise changed. I was able to get the machine to eventually boot by holding the notebook in my hands at an angle and spinning myself on the spot. At the time I guess the gyroscopic forces were enough to get the bearing to sit right and the HDD to be able to spin properly. Doing so caused the drive to work long enough to get the most important files off it. Definitely the strangest thing I’ve ever done to “fix” a piece of computing equipment.

270 points by lrizzo 7y ago

If you Google for the word "sticktion" or "stiction" you'll find other remedies. Like putting it in a ziplock bag and freezing it, or (youch) purposefully dropping it. All approaches to release a head that's stuck to a platter.

azinman2 7y ago

How did the data not get destroyed by the magnet?

aewens 7y ago
Yeah, this technique should really only be used if, and only if, you need the drive itself to be fixed and no longer care about the contents of the drive (e.g. if it was in a RAID 1 and manually cleared afterwards).
ebg13 7y ago
There are actually very powerful permanent magnets inside of every spinning hard drive already, so clearly there's more to destroying data than just having a magnet nearby. https://www.kjmagnetics.com/blog.asp?p=hard-drive-destruction https://www.kjmagnetics.com/blog.asp?p=hard-drive-destructio... has a writeup about trying and failing to wipe a drive with extremely powerful magnets.
- gist 7y ago
  You know what is sad about a small business (kjmagnetics.com) that you linked to? They are exactly what will be killed off by Amazon. The small and knowledgeable specialty store very similar as I am sure many of us remembered happened to 'Stereo Stores' once the big boxes stores came along (or hardware stores). Nothing new about this of course just that with Amazon it's greatly accelerated.
  - cowsandmilk 7y ago
    Amazon is 8 years older than K&J Magnetics...but sure
    - gist 7y ago
      What does that have to do with the point that I am making? Did I make say it started before Amazon?
- bradknowles 7y ago
  There are degaussing devices that look like microwave ovens, and for all I know, that might be largely how they operate. But outside of those, no magnet that you can hold in your hand will demagnetize a modern hard drive at any distance outside of the case, because there are magnets inside the case that are stronger than you can hold in your hands, and they’re used to move the head/arm assembly at mind-blowing speeds — and accuracy. I have some old Imprimis Wren VII hard drive magnets still on my dad’s fridge, from the time when I did an internship there in 1989. I won’t say that you can’t remove them from the fridge, but they are stuck on there extremely well, and there are a number of people who had been injured by having their hand or fingers caught between those magnets and a ferrous metal object — like a fridge. And that was 1989. The magnets they use now are much stronger. Now, if you happened to put a hard drive inside an MRI machine, that would do the job. But then you’re also talking about a machine that could suck up a vacuum cleaner from across the room and turn it into a lethal projectile. A proper degausser will be a lot weaker than an MRI machine.
mirimir 7y ago
It's changing magnetic fields that wipe HDDs. Such as powerful electromagnets. In a clean (enough) room, they could have opened the drive, and just poked the actuator arm. Decades ago, I had a HDD that wouldn't spin up unless I nudged the platter with a pencil erasor. Very near the center, of course. There was a hole in the case, in just the right place, with Al tape over it.
- pontifier 7y ago
  Doesn't even have to be a very clean room... I played around with an old 1 gig drive years ago. My friends and I opened up the case so we could watch the drive doing it's thing. We did a fresh os install and watched as it formatted the disk and copied files. The head was remarkably strong, and would move so fast it looked like it was in 2 places at once while copying files. It was fun to stick a screwdriver between the 2 ghostly write arms, and have the screwdriver almost knocked from your hand, while the drive went on like nothing had happened. It ran for weeks before it died. I've also stuck a 3 1/4" floppy disk to a huge 2"x2"x5" neodimium magnet with no ill effects. The drive was able to read it fine afterwards with the same md5 hash of the contents.
  - commandlinefan 7y ago
    If you videoed any of that, I'd love to watch it on youtube (or somewhere).
  - gist 7y ago
    That's pretty cool. I had a few old drives and on purpose took them apart. So far I was not able to duplicate what you were able to do (this was last month). I had an idea that it might work in some way. Glad that you can confirm it did at least when you tried.
  - 4ad 7y ago
    My first HDD has a 540MB drive, I ran DOS. Eventually I upgraded to newer computers, and I opened the old drive, and put in on the wall on display. It stood there for at least a decade, possible 15 years, before I moved to a different country. Before leaving, I decided to connect the old drive to a computer, just for kicks. Remarkably, I could read data off it. Not much, file i/o mostly ended up in failure, but I could at least see the file structure. I did not expect this.
cecja 7y ago
the whole magnet and hard drives thing is a really old hoax. with normal household magnets or even strong neodym magnets nothing will happen to your data but if you have a really strong industrial electro magnet at hand you can wipe a drive with it... here is an old national geographics video on the topic https://www.youtube.com/watch?v=U8LWTe5CqQg https://www.youtube.com/watch?v=U8LWTe5CqQg
- EvanAnderson 7y ago
  Here's my anecdote: In 2006, while sitting at my desk playing a video on the Travelstar 40GB PATA drive in my Thinkpad T22, I held a single neodymium magnet (harvested from an old hard disk drive) about 6 inches from the left side of the unit (where the ~disk was located). The video froze, Windows XP blue-screened, and the hard disk drive started emitting a ~10Khz whine. I jerked my hand away from the PC immediately when the whine started BIOS would no longer detect the disk on that machine, or any other I tried it on (on both USB-to-PATA and honest-to-goodness motherboard PATA controllers). The drive spun up but made a repeated ticking sound (I assume seeking back and forth looking for servo tracks). I sent the drive to Kroll Ontrack (because, stupidly, I had billing data that wasn't backed-up on the drive). The report I received back indicated that 80% of the drive's sectors were unreadable. As an aside: The data I was looking for was ASCII text and Kroll Ontrack was completely unhelpful in just sending me a bitstream image of the drive so I could grovel thru looking for data I needed. Being plain ASCII, their "file carving" tools didn't locate any of the data. (They sent me a "preview" of the data they'd located, and while it got lots of Microsoft Office-format files, it didn't have any ASCII text files). I offered them a 3x multiple of the rate they asked for file-level recovery to simply send me the bitstream image of the disk that they'd already made. They wouldn't do it, and wouldn't even let me pay to talk to somebody who understood what I was asking for. I ended up taking a major loss on the billing data I destroyed. I'll never recommend them to anybody. I won't ever play with neodymium magnets around spinning rust media again either. I also had a major failure of my discipline re: backup at that time, too. The cobbler's children always go barefoot-- I was being too cavalier with my backup strategy (or lack thereof) and not treating my own data like I would a Customer's.
  - 7y ago

dukoid 7y ago

Don't use dd -- use ddrescue (reads all "working" sectors before retrying broken ones).

ddtaylor 7y ago
Does this mean it puts less strain on a potentially broken disk in an attempt to maximize how much can be rescued before it fails?
- askvictor 7y ago
  yep; it's quite clever about how it deals with broken sectors too; starts jumping over them in increasingly large amounts, and goes back later (in multi-pass) to get the missing bits.
- segfaultbuserr 7y ago
  Yes. There is also a related technique used for RAID rebuilding - SCT Error Recovery Control [0] (Western Digital's name is Time-Limited Error Recovery). The main idea is to limit the maximum time allowed during a hard drive's attempt to recover from a read/write error. Without such a limitation, when the hard drive encounters a failure, it may try rereading and remapping a bad sector and becomes temporarily unresponsive, making the RAID controller to believe that the entire hard drive has failed, and potentially put more strain on the existing disk in an unnecessary full rebuild. [0] https://en.wikipedia.org/wiki/Error_recovery_control https://en.wikipedia.org/wiki/Error_recovery_control
Kenji 7y ago
Agreed. ddrescue is great, I used it to rescue a disk with bad sectors.

rgj 7y ago

My anecdote: Around 1993 I had a Commodore Amiga with an A590 external hard drive. A big enclosure that could be connected to the expansion port on the left of an Amiga 500, containing a very precious 20MB hard disk. One day, it stopped working. I tried everything but I couldn’t get it to work. A friend offered to take a look at it so I put it in my backpack and took the train to my friend. When connected to his A500, the drive worked lime a charm. When I drove back home in the train I wondered what would be the matter with my A500 since it apparently made my A590 hard drive fail. However, once I got home and reconnected the drive, it worked. No problem whatsoever. Until two days later. It failed. You know what’s going to happen, right? Took it to my friend, it worked, took it back and it worked for two more days. Turns out that disconnecting it, putting it in my bag, walking it around for a while worked just as well. Turns out that disconnecting it, dropping it from 5cm / 2 inches and reconnecting it, worked just as well. Which was what I did for the next four years or so. Whenever it stopped working, I disconnected it, dropped it and reconnected it. Always loved the look on the face of people who witnessed me starting up my Amiga.

michaelcampbell 7y ago
"sticktion" was an issue with some early Mac drives.
- bradknowles 7y ago
  In 1989, I did an internship with Imprimis, which was later sold to Seagate. I worked in the Manufacturing Engineering group, and specifically with the Engineers behind the “Wren” line of hard drives. IIRC, up to the Wren V, they had problems with the lubricant sometimes overheating and leaking out of the spindle onto the platters. When the hard drive spun down, the heads would be glued to the media by the lubricant, thus resulting in stiction. They developed a “thermalwriter“ test process for the drives to put them through heat conditions way beyond what they might experience in the field, and then developed lubricants that could withstand the heat. They were very proud of this process. But there were still lots of old drives out there. One of the things the clean room would sometimes do is take hard drives from important clients and try to recover them. I saw a lot of nasty failures, many of which were a result of inappropriate techniques being applied to try to temporarily free the heads. There was a lot of FUD at the time on what would later be called “The Internet”, so one of my first contributions to the community was to take the knowledge of the engineers at the company and developed a FAQ that I posted to the various USENET newsgroups, on the right — and wrong — ways to try to address this issue in the field. Sometimes I wonder if that FAQ ever survived.

sdfjkl 7y ago

I've fixed this problem a few times (on different drives) by giving the drive a not so gentle thwack with a hammer. The trick is to hit it on the long side, which tends to dislodge the stuck heads/arm. If you hit it on the top or bottom, you're likely to break something, and hits on the short side aren't likely to achieve anything at all.

pmiller2 7y ago
I've used this method after the fridge/freezer method failed. It seems less likely to cause data loss than using a magnet to move the head as in the article.
LIV2 7y ago
Many jobs ago we had an outage caused by 2 drive failures in a Raid 5 system, that was resolved by banging the drives on the ground a couple of times before putting them back in. If I still worked with physical servers I'd be carrying around a rubber mallet to apply "percussive maintenance"

jacquesm 7y ago

Clever! I'm stuck on a problem right now as well, I'm trying to boot an old server (Supermicro, dual CPU) to verify something and for the life of me I can't figure out what is wrong with it. It doesn't do anything when you power it up, even the power led on the board doesn't light up. Forcing the powersupply to 'on' does light up the LED but the system still won't boot. Already put a fresh 3V cell in it, stripped it down to the bare minimum, all jumpers in default positions, no go. And it worked perfectly fine the last time it was shut down. Highly frustrating these gremlins.

lallysingh 7y ago
Check your IDE cables
- jacquesm 7y ago
  SCSI system, already pulled the controller out and disconnected the backplane. Really weird this one. But thank you for the suggestion. In fact, that's the whole reason I want to boot it, the drives are a hardware raid which is hard to port to a machine where the controller won't fit.
lallysingh 7y ago
Oh, did any caps blow? There were some counterfeit ones going around some time ago...
- jacquesm 7y ago
  That's a good one, did not think to check that, I'll go over all the caps on the MB.

bewilderbeast 7y ago

My story: In 1996 or 97, a friend brought me his Compaq Deskpro, the SCSI HDD had stopped working. No sound at all, dead. Tried everything, checked voltages, reconnected cables trying to clear any oxidation. Wouldn't spin at all. Well, called it a night. Next day, decided to take it out of the chassis for a last test, connected outside. Not only it spun, it worked fine!!! WTH???? Well, into the chassis it went. Nothing. Dead. Whaa..??? Outside again, it worked. In the chassis, dead. Outside, worked. Scratched my head... With it working outside, just tried to place it on top of the chassis. It spun down and stopped. Took it away, it spun up. Got it close again to the chassis, it spun down again... Scratched my head again... Gave up, left it disconnected outside for the day. Next day tried it again and this time it worked outside of and in the chassis... My thoughts? The chassis was magnetized or something... Worked for a couple more years.

0xcde4c3db 7y ago
Perhaps a defect in a cable or connector such as a broken wire or a dry solder joint? These often cause problems that mysteriously appear or disappear as the cable is moved and the changing forces on the defect make and break the connection.
- bewilderbeast 7y ago
  Nope, I tried everything, twisted the cables, etc. I even changed from power connector to another and changed SCSI cable. Outside it worked, inside didn't. Working perfectly outside, as soon it got close to the metal of the chassis it spun down, and as it got away from the metal it spun up.

glennvtx 7y ago

I have fixed a ton of drives, in general. Board replacements, swapping platters, head swaps, etc. Some takeaways: I started doing this under tupperware, and that worked. I built a "cleanroom" out of a new sandblasting cabinet, and that worked better. Later i built a laminar flow bench out of a cheap kobalt tool-box and some plexiglass, and that was better still. Swapping the control boards works on some makes (wd), make certain it is exactly the same model and revision. exactly. "close enough" never worked for me, not even once. By far just a slight "spin" by hand along the axis of travel of the disk, a quick gentile flicking motion, works to unfreeze the spindles of most stuck drives. Some drives responded to a gentle heating of the spindle bearing with the hot air. Use dd_rescue. "Spinrite" is complete horse-shit, don't listen to anyone saying otherwise. Most drives people brought in were just corruptions, photorec and it's associated programs (testdisk) are also invaluable..

eitland 7y ago
Do you (or anyone else) have ideas for what to do with - a MyBook that isn't recognized anymore? I've figured out there's probably some encryption in the casing because when I disassemble it and connect it directly it shows up as unformatted or something. - an ssd which seems even more dead. Personally I've gotten back erased data (photorec) and data from at least 2 other disks (tilting the disk or freezing the disk), but these two have me stumped which is sad since they broke shortly after each other and one were supposed to be the backup ;-)
- londons_explore 7y ago
  The drive itself is likely good - it's probably a software/config error with the casing. A drive recovery company will probably be able to recover it cheaply, or third party recovery software on the bare drive.
  - eitland 7y ago
    Ok, thanks! Would you happen to know why they'd transform the data instead of just writing through? Oh: and I also added detail about another drive to my question. I didn't think anyone would answer that fast :-)

wwright 7y ago

This a fantastic webpage.

djsumdog 7y ago
Simple and straight to the point ... although some navigation would be helpful to see, you know, the rest of the website.
- knolax 7y ago
  TBF from the ~luigi part of the url you can tell that it's probably one of those "web sites" allotted to each user on a university server or something similar, eg. go to http://info.iet.unipi.it/~luigi/ http://info.iet.unipi.it/~luigi/ for his homepage.

djsumdog 7y ago

I have successfully used the freezer trick a few times to recover a hard drive. It did work in those instances and I documented it here: https://battlepenguin.com/tech/freezing-a-hard-drive/ https://battlepenguin.com/tech/freezing-a-hard-drive/ If you can, leave the hard drive in the freezer while you access it. Only works for old spinny hard drives of course.

vectorEQ 7y ago

instead of magnet, what i used to do with ticking / corrupted drives was write full of 0, then write full of 1, then full of 0, repeat a few times. it takes frigging agents, but it kind of gets out all of the bumps in the magnetic material and smoothens it out again. fixed many broken drives doing that. ticking is often the read head getting dumped too much due to magnetic substance on the disk being piled up too much giving too much of a push to it. then the ticking will cause similar piles to form and get worse and worse.

londons_explore 7y ago
Alternative explanation: some sectors are unreadable due to checksum errors (caused by improper powerdown). Repeated read requests sounds like ticking because the head will be seeked every time. Writing all 1's or 0's to the drive causes those sectors to either be rewritten or reallocated. The fact it's 1's and 0's wouldn't have an impact anyway - all drives use data whitening techniques anyway.

unnouinceput 7y ago

Those $1.5 apparently came from a leprechaun, there is no other explanation :).

randompi 7y ago

View page source. What a beauty ️️.

thepete2 7y ago
Really? He doesn't close the tags.
- wizzwizz4 7y ago
 That's only a problem for XHTML. HTML5 implicitly closes the previous tag when you open the next one; thus, a inside a is an implicit , if you will.
 - colejohnson66 7y ago
 Why does VS Code auto add the closing tag when you open them then? It doesn’t do it for, say, <img>. Bug?
 - wizzwizz4 7y ago
 Feature. tags can function as containers for text and other elements, and VS Code can't distinguish between , with the special handling, and <div>, without it. Okay, to be fair, that does sound like a bug.
 - thepete2 7y ago
 Didn't know that. Thanks :)
- CaptainMarvel 7y ago
 That’s optional in HTML5
glaberficken 7y ago
Came here to post exactly the same. You CAN write human readable html!

tartoran 7y ago

I had numerous HDs fail with the clicky noise when powered up. I was never able to recover any of them. Is it possible nowadays to fix these without replacing the drive controller? I remember this clicky problem forever destroyed my trust in harddrives. Are hard drives any better these days??

throwaway3563 7y ago

The strangest HDD failure I ever dealt with was a Toshiba notebook drive where the centre bearing had become shot. The notebook would not boot and the HDD sounded like a coffee grinder. By moving the notebook in the air and trying different positions the noise changed. I was able to get the machine to eventually boot by holding the notebook in my hands at an angle and spinning myself on the spot. At the time I guess the gyroscopic forces were enough to get the bearing to sit right and the HDD to be able to spin properly. Doing so caused the drive to work long enough to get the most important files off it. Definitely the strangest thing I’ve ever done to “fix” a piece of computing equipment.