4 ms·
UDP requires some physical layer, which 802.11 provides. There are others, but in any case, you can't just "broadcast UDP" over the radio by itself.
by int_19h 7y ago
UDP requires some physical layer, which 802.11 provides. There are others, but in any case, you can't just "broadcast UDP" over the radio by itself.
- Eehoj2zaiph 7y agoYes, of course. Any suggestions on SDR-based hardware/software options?
- syedkarim 7y agoWe broadcast UDP over various satellite transponders. We have also done this over terrestrial links. We've done UDP file broadcasting over DVB-S/DVB-T/LoRa/FSK/etc with forward error correction in the client/receiver. Feel free to contact me. Email in my profile.
- Erlich_Bachman 7y agoThat was the question, how to implement those layers. Why complain about terminology, what does it contribute? Can you recommend specifics?
- defen 7y agoThe question was too underspecified to give a good answer. It's the equivalent to asking "can I send data over the internet"? The answer to the question as-asked is "yes", but the details will be substantially different depending on what you're actually trying to do.
- Erlich_Bachman 7y agoThe question was precisely much more specific than "data over internet". They indicated that they had UDP packets, which is the specification of the application layer, it means that they have an application that already works with UDP and they just want to send them over the radio, bypassing WiFi protocols/cards etc, from an SDR to an SDR directly. It means that whatever solution is, if it can work with UDP, if the underlying layer translates data into UDP, it will work with their application. That's a very precise specification.
- defen 7y ago> from an SDR to an SDR directly That wasn't actually stated. Maybe OP has a bunch of laptops with WiFi cards and no access point and wants to broadcast data to them with the laptops listening in monitor mode. Or maybe OP has a bunch of laptops connected to an access point and wants to broadcast to them using IP multicast. Or maybe OP really does have a bunch of software-defined radios and wants to directly encode UDP packets into IQ samples. Don't you think those would be three very different solutions?