2 ms·
I used to have a favorable impression of what General Fusion was doing. Their approach addressed one of the big engineering problems facing fusion: have materi
by pfdietz 7y ago
I used to have a favorable impression of what General Fusion was doing.
Their approach addressed one of the big engineering problems facing fusion: have materials that can withstand the power/area across the surface of the reactor, and particularly stand up to neutron and energetic charged particle bombardment of the reactor structure.
Their first approach involved putting a plasmoid (spheromak, as I recall) in a cavity in a bath of liquid metal (lithium say), then launching a focused shock wave inward to compress the cavity and the plasma to very high density. There would be no solid reactor component exposed to the radiation from the plasma (a thick layer of liquid lithium would be interposed in all directions), and the peak pressure could be much higher than structural materials could withstand (because the compression and reaction would occur on time scale short compared to the time required for a sound wave to propagate across the liquid.)
But it turned out this approach was fatally flawed.
While they had trouble with confinement, the big problem is that to get that fast a reaction, very high density, and therefore very strong magnetic fields (magnetic pressure goes as magnetic field squared) would be required. Peak fields in their first approach would be as high as 700 T. But this would imply very large currents would be flowing in the liquid metal compressing the magnetized plasma. Beyond ~100 T, these current would be so strong that the surface of the metal would be vaporized, and non-conducting metal vapor would flow into and quench the plasma. Game over.
So, they've gone to a slow scheme. The implosion is now subsonic, and also there's a metal post running down the center of the chamber to increase stability. But this ruins the main attractive feature of their concept. That metal post will be subject to orders of magnitude higher average neutron flux than the walls of typical fusion concepts, and will also be crushed with magnetic pressure from 100 T magnetic fields. The engineering to make this work would be beyond heroic. The subsonic compression also means the entire reactor vessel will experience very high pressures, even if the rest of it is shielded from the radiation.