4 ms·
I'm curious how they are bridging the gaps for windows and doors. I imagine toothpaste consistency concrete doesn't hang in the air very well. Or at least not n
by walrus01 7y ago
I'm curious how they are bridging the gaps for windows and doors. I imagine toothpaste consistency concrete doesn't hang in the air very well. Or at least not nearly as well as thin, hot, stringy PLA, ABS or TPU filament coming out of the nozzle of a common 3d printer.
- KukicAdnan 7y ago3D Printers usually have support columns that are easily taken down once the print is complete. Maybe something similar?
- walrus01 7y agoRight, I've done this with auto generated supports in Cura for PLA and ABS fused deposition printing. Removed with needle nose pliers. But if done with semi liquid concrete wouldn't it cure together and become very difficult to break apart ? https://m.all3dp.com/2/cura-support-settings-optimize-your-supports/ https://m.all3dp.com/2/cura-support-settings-optimize-your-s... Looking at the photos of the houses, I wonder if they pause the printer at the point just before where it needs to draw the first layer above the top of the window frame. At that point a couple of workers manually lift the prefab window unit into place. Then the printer can resume and print that next layer on top of the top of the window frame.
- wahern 7y agoThey manually add headers for spanning openings and leave them in place. You can see here: https://youtu.be/is2UVodNphY?t=37 https://youtu.be/is2UVodNphY?t=37 That said, wooden and, more recently, foam forms have been used since forever. (At least a hundred years?) Breaking the forms away from cured concrete doesn't seem to be problematic. EDIT: Also, in another video there's a brief shot where the machine is printing the internal zig-zag pattern over a steel mesh manually placed on the wall, presumably for reinforcement. I fast-forwarded through 4 or 5 videos and it's almost suspicious the way they avoid capturing these details. I guess such details don't fit the narrative they're selling.
- walrus01 7y agoThey really show only very brief glimpses of the actual printing process. Not even 1/100th of the linear extruded length of a single layer before the video cuts to something different.
- parineum 7y agoI think that answers my question of how it's seismically sound. There's got to be something in there that supports horizontal forces.
- wahern 7y agoFWIW, they show the mesh in the first few seconds of this video: https://www.youtube.com/watch?v=wCzS2FZoB-I https://www.youtube.com/watch?v=wCzS2FZoB-I Personally I think they should emphasize the manual labor requirements. One of the strongest criticisms of 3D-printed and prefab housing technology is that it reduces demand for low-skilled labor. For the past 80 years home construction has been a major pillar of the American labor economy; likewise for China and many other countries. Free or reduced cost housing is great, but to the extent it comes at the expense of a sustainable labor economy, then it's problematic.
- joshuaheard 7y agoThe openings look "U" shaped, and filled with the window frame and topped with vent tiles. It doesn't look like any support is needed as those are probably added after the print dries.
- altacc 7y agoFrom glimpses in photos & videos it looks like humans are involved at various stages of production, including putting metal plates across the gaps for doors & windows.
- jcims 7y agoThey put a pre-cast bridge over the opening and continue over top of it.