3 ms·
No, no, you did not need to interleave blank cards with original cards to duplicate a deck. That was something you could do on a keypunch if absolutely necessar
by Animats 7y ago
No, no, you did not need to interleave blank cards with original cards to duplicate a deck. That was something you could do on a keypunch if absolutely necessary.
The IBM 519 Document Originating Machine was a 514 Reproducer with a mark-sense reader attachment. That was the "document originating" part. Loaded with an 80-80 reproduce board, either machine could copy a deck of cards. Two feeders, one with a reader, and one with a punch, going to separate output stackers. Duplicating a card deck was its most common use, although it could do a few other tasks.
The 514 and 519 could be cabled up to a 407 accounting machine, using a cable almost 2 inches in diameter and a huge connector about two by six inches. This allowed the 407 to generate new punched cards with results from a tabulator run.
The little glass window front and center was the comparison display. The original and new card were usually re-read by a second set of brushes and compared, as an error check. That display showed any differences.
The 1401/7090 combo was fairly common. A lower end configuration used the IBM 7040, and that setup was popular with universities. The usual setup was to have some tape drives shared between the two computers, with manual switches. Cards were read into the 1410 and written to tape, and output was written to tape on the 7090 and printed on the 1401, using a 1403 printer like the one at the Computer Museum in Mountain View.
Here's what a job, as a deck of cards, looked like.[1]
[1] http://sky-visions.com/ibm/7090/ibsys/jobs/arg1.fo http://sky-visions.com/ibm/7090/ibsys/jobs/arg1.fo
- stan_rogers 7y agoThat's how we did things when I was in high school. Local keypunch wasn't an option, and having somebody transcribe written programs was too expensive for supporting a couple of dozen schools in the district, so we used Mark Sense cards. Those were slow to read directly, so our cards were duplicated to punch cards on the cheap machine while the expensive machine was doing slightly more important things than printing out "syntax error, try again idiot". It was then much faster to batch a couple of hundred syntax error messages from punched cards during free time. One must think about process efficiency.
- cjslep 7y agoMe, 2015: "This engineering code is some serious fixed FORTRAN" My 80+ year old boss at the time: "Yeah it had to be" Whips out several boxes of punch cards
- 7thaccount 7y agoWhat kind of engineering code you dealing with? Just curious.
- cjslep 7y agoIt was a tornado risk assessment wind fragility modelling software, used by the nuclear power industry.
- 7thaccount 7y agoLike for the spread of fallout?
- cjslep 7y agoNo, like "what happens if a tornado hit the powerplant and chucked trees and other debris at various parts of the powerplant".
- glitchc 7y agoSounds like NASA.
- C1sc0cat 7y agoTerrible use of statement numbers and are those continuation lines I never used those