3 ms·
My understanding of CPU-physics is as follows: https://www.ti.com/lit/an/scaa035b/scaa035b.pdf https://www.ti.com/lit/an/scaa035b/scaa035b.pdf Page 4 (page8 i
by dragontamer 7y ago
My understanding of CPU-physics is as follows:
https://www.ti.com/lit/an/scaa035b/scaa035b.pdf https://www.ti.com/lit/an/scaa035b/scaa035b.pdf
Page 4 (page8 in PDF):
> P = C * V^2 * f * N
Power-used = Capacitance * Voltage^2 * Frequency * Number of Bits flipped
This equation roughly holds for all CMOS circuits, from the 1970s through today's CPUs. Smaller transistors result in smaller capacitance, which is what led to Dennard scaling for the past 40 years. Otherwise, the physics are the same.
Static-power consumption in CMOS is theoretically zero, and measured to be femto-amps. Static power consumption can therefore be ignored, only dynamic power matters in the real world.
Assuming the same transistor size (aka: capacitance), you can see that power use is most strongly determined by voltage. Another note: higher frequencies (say 3GHz or 4GHz) requires more-and-more voltage to sustain.
A mobile chip drawing 1/2 voltage at 1/2-frequency will have 1/8th the power consumption but take 2x longer to complete a task. Overall, you have 1/4th the power consumption used.
----------
This is why servers reduce frequency and voltage and save on power in practice.
- dannyw 7y agoAs another example, many cryptocurrency miners undervolt their cards to get better performance per unit of energy.