3 ms·
I started wondering about the physics of removing 280W of heat from the tiny silicon die/dice. Is most of the heat conducted through the metal connections or th
by fulafel 7y ago
I started wondering about the physics of removing 280W of heat from the tiny silicon die/dice. Is most of the heat conducted through the metal connections or through the package? What material is the package made of?
- rubbingalcohol 7y agoThey use a heatspreader (solid metal surface, the "top" of the chip) soldered to the actual cores. Then you slap a heatsink or water block on and tighten it down on the heatspreader with the help of a thermal interface material (metallic goo). The actual cooling done by the heatsink or water cooler is pretty basic and similar to what you'd find inside cars or home A/C units. With "280 watts" you can still use an off-the-shelf Noctua air cooler or any number of all-in-one water coolers.
- kllrnohj 7y agoIt's not actually that tiny and it's pretty spread out. The HEDT chips are physically very large. You can see how the dies themselves are laid out here: https://images.anandtech.com/doci/15151/amd_rome-678_678x452_575px_678x452.png https://images.anandtech.com/doci/15151/amd_rome-678_678x452... And you can see how physically huge the package is here compared to desktop CPUs you may be more familiar with: https://images.app.goo.gl/T5kpz8WyjGHV8Vqm8 https://images.app.goo.gl/T5kpz8WyjGHV8Vqm8
- the8472 7y agohttps://images.anandtech.com/doci/13401/2018-10-08%2010.38.03.jpg https://images.anandtech.com/doci/13401/2018-10-08%2010.38.0... The lid is made of copper and as you see there are additional layers. Plus the interfaces between the materials are also limiting thermal conductance. As far as material science goes there's a lot of room, it's just not practical to throw liquid nitrogen cooling or diamond substrates at the problem when you're making a mass market product.