5 ms·
Fusion in a magnetically-shielded-grid inertial electrostatic confinement device
- carapace 7y ago(2015) Abstract: > Theory for a gridded inertial electrostatic confinement (IEC) fusion system is presented that shows a net energy gain is possible if the grid is magnetically shielded from ion impact. A simplified grid geometry is studied, consisting of two negatively-biased coaxial current-carrying rings, oriented such that their opposing magnetic fields produce a spindle cusp. Our analysis indicates that better than break-even performance is possible even in a deuterium-deuterium system at bench-top scales. The proposed device has the unusual property that it can avoid both the cusp losses of traditional magnetic fusion systems and the grid losses of traditional IEC configurations.
- skykooler 7y ago> Our analysis indicates that better than break-even performance is possible even in a deuterium-deuterium system at bench-top scales. That means it should be relatively easy to verify in a laboratory, right?
- ChuckMcM 7y agoYes, that was my take on the paper.
- ceejayoz 7y agoThat it hasn't since publication in 2015 indicates they missed something.
- rolph 7y agohttps://arxiv.org/abs/1808.00622 https://arxiv.org/abs/1808.00622 [2019] " Equations describing plasma equilibria are derived from the total energy of the system. The MHD equilibrium is shown to hold even for systems where the magnetic field may locally vanish. Through conservation of helicity, confinement is shown to be intimately related to electromagnetic tension. For an axisymmetric device, the presence of a magnetic field or current circling the axis is shown to be destabilising. This provides a simple explanation for the poor performance of some devices for which MHD predicts stability" there is a cadence between electric charge motion and magnetic flux, and a dynamic balance has to be manufactured. the addendum describes the magnetic confinement of electrodes to be a source of instability in the reaction. as well as providing a corrective factor for the mathematics, describing the theory.
- Retric 7y agoFusion over breakeven releases a boatload of ionizing radiation. So, it’s not exactly a safe thing to put on a lab bench. As even a single watt of power requires the kind of wall you put on a nuclear power plant. As a rule of thumb, fusion is only really vastly better than fission once you turn it off. That said, I agree there is likely something wrong with the design.
- rolph 7y agoThats the thing, even if you get the technique down right, then the system has to be engineered to transduce that energy and other product into something we can use. such as mechanical motion or electromagnetic generation/propulsion, or harvesting products such as isotopic helium.
- gpderetta 7y agoyou can build your own fusion reaction in the comfort of your home. Apparently fusor devices [1] are hobbist level difficulty. They are nowhere near break even, but they do generate a lot of radiation which can still be contained safely on a benchtop apparently. [1] https://en.wikipedia.org/wiki/Fusor https://en.wikipedia.org/wiki/Fusor
- Retric 7y agoAt the hobbyist level they are making detectable amounts of radiation, but only something like 1 trillionth of a watt worth of fast neutrons per second.
- dcminter 7y agoI was under the impression that bremsstrahlung losses were the main barrier to breakeven in fusor-like devices. Is this not susceptible to that?
- dcminter 7y agoAnswering my own question: apparently not per section E.
- jleahy 7y agoThey're making the assumption that the ions and electrons can be held outside of thermal equilibirium (and provide no evidence for this). In reality thermalisation is likely to occur rapidly due to frequent collisions, once thermalised a normal Maxwell distribution will apply and Bremsstrahlung losses will return with a vengeance.
- LifeLiverTransp 7y agoFusion will be ready, the moment we no longer need it.
- Azrael3000 7y agoAs this paper is from 2015 and I can't claim to understand it, is the follow up paper by the first author [0] the reason why it actually doesn't work? [0]: https://arxiv.org/abs/1808.00622 https://arxiv.org/abs/1808.00622
- rolph 7y agothey are using electric charge to move plasma particles around, and a magnetic field to enclose the charged electrodes and protect them from the plasma. the electrode setup was a concentric ring setup so it was simpler than a spherical setup like a fusor kind of device https://en.wikipedia.org/wiki/Fusor https://en.wikipedia.org/wiki/Fusor https://en.wikipedia.org/wiki/Polywell https://en.wikipedia.org/wiki/Polywell the most common fusion concepts nowadays involve magnetic enclosure and or compression, of plasma, and electric charge based acceleration of the plasma.
- cygx 7y agoAt first glance, no.
- ben_w 7y agoI’ve been wanting to research magnetically shielded grids since 2007, but I’m not formally trained in physics [0] and don’t know where to begin. Can anyone make any recommendations for well-documented MHD simulator libraries? [0] Informally I watch PBS Space Time and similar channels, but good though that content is, it’s not the same as a real qualification.
- ohiovr 7y agoSomething has to hold the magnets and physical supports will cool the plasma. Also there is a non trivial amount of magnetic force to contend with.
- journalctl 7y agoSo don’t bring your credit cards in to work!
- sandworm101 7y agoDon't bring your dental fillings either.
- ars 7y agoYou are probably joking, but just in case not: dental fillings are not magnetic. They are amalgams of mercury and silver.
- ohiovr 7y agoTry dropping a neodymium magnet down a length of copper pipe sometime. I would think that sensation would be quite disturbing from something hugging a tooth.
- sandworm101 7y agoAnd the dental posts that hold crowns? Or the metal pins that screw implants into jaws? >> Projectile Accidents: This is the scariest type of interaction, in which the MRI’s magnetic field literally pulls a restoration out of the mouth. The projectile restoration can injure the person with the restoration or, possibly, others nearby. >> Damaged or Dislodged Restorations: Magnetic fields may not interact strongly enough to actually remove a restoration. But they may still be strong enough to move, break, or deform restorations. https://www.topdowndental.com/blog/mri-safety-with-dental-crowns-and-restorations/ https://www.topdowndental.com/blog/mri-safety-with-dental-cr...
- houseboat 7y ago"... in a mysterious and highly fluid vacuum, the force is not very small; it only moves at the speed and frequency of the plasma from two to three orders of magnitude faster than the plasma of other electrons to three orders of magnitudes..." This makes me wonder what would happen to this device? Is it a device like the SG?
- DennisP 7y agoThis design sure looks a lot like the illustrations I've seen for Lockheed's fusion reactor design. Scroll down on this article, for example: https://www.forbes.com/sites/arielcohen/2018/08/01/will-lockheed-martin-change-the-world-with-its-new-fusion-reactor/#6bd10de34c49 https://www.forbes.com/sites/arielcohen/2018/08/01/will-lock... Compare that to the paper's figures, starting on page 2.
- earthicus 7y agoAbove the illustration in the text, the paper references work from 2001-2006 for motivating that geometry: [19] J. Khachan and S. Collis, Phys. Plasmas8, 1299 (2001). [20] J. Khachan, D. Moore, and S. Bosi, Phys. Plasmas10, 596 (2003). [21] O. Shrier, J. Khachan, S. Bosi, M. Fitzgerald, and N.Evans, Phys. Plasmas13, 012703 (2006) In particular all three citations refer to Joseph Khachan's work: https://sydney.edu.au/science/about/our-people/academic-staff/joe-khachan.html https://sydney.edu.au/science/about/our-people/academic-staf... And Bosi seems to have been at Sydney at the time as well: https://www.une.edu.au/staff-profiles/science-and-technology/sbosi https://www.une.edu.au/staff-profiles/science-and-technology...