3 ms·
note that there isn't that much efficiency left on the table: the best turbine is about 62% thermal-efficient[1] (note - not an aircraft engine). compare that t
by baq 7y ago
note that there isn't that much efficiency left on the table: the best turbine is about 62% thermal-efficient[1] (note - not an aircraft engine). compare that to the theoretical carnot cycle at approximately jet operating temperatures - it's about 80%. these things are approaching dark magic territory at ~75% theoretical thermodynamic maximum.
[1] https://www.ge.com/power/about/insights/articles/2016/04/power-plant-efficiency-record https://www.ge.com/power/about/insights/articles/2016/04/pow...
- baybal2 7y agoRaise the temperature, slap on recuperation, reheat, and intercooling, add bottoming cycle and you will certainly get to 70%+ with modern materials and sufficiently large turbines
- credit_guy 7y agoBy my calculation the carnot efficiency for the jet operating temperature is about 85.5%: 1-T_cold/T_hot, where T_cold ~ 230K (it's quite cold at high altitudes) and T_hot ~ 1588K (or 2400 F, which is the hottest temperature in the Leap engine produced by GE, which powers the 737-Max [1]). This is only possible though because of GE's usage of the ceramic matrix composites (CMC) which allows for 150-200K hotter temperatures than classical alloys. Now the current CMC method employed by GE uses silicon carbide, which has a melting temperature of about 3000K. If one day they could switch to hafnium carbide, with a melting temperature of more than 4100K, the carnot efficiency could reach more than 89%. [1] https://www.ornl.gov/news/ceramic-matrix-composites-take-flight-leap-jet-engine https://www.ornl.gov/news/ceramic-matrix-composites-take-fli...
- baq 7y agodidn't know they get so hot. i assumed 1170K (900C) exhaust temperature and -50C cold reservoir. this is even darker magic than i suspected :)