4 ms·
I think the real answer was it was one of the first computers that made sense; it was relatively cheap, especially compared to IBM, but had 64k of memory and co
by jchw 7y ago
I think the real answer was it was one of the first computers that made sense; it was relatively cheap, especially compared to IBM, but had 64k of memory and color graphics (and better color graphics than IBM had, at that.) It boots directly to BASIC and comes with a book that explains the machine and how to write code for it. I don’t think that was uncommon for the era, but seriously, imagine that today!
The Commodore 64’s appeal never really ended. I was born in ‘93 so there’s not really any nostalgia in it for me, but I just recently bought a broken Commodore 64 and got it all working.
For one thing, there’s something to be said about the simplicity. 3 screws gets you into the computer, and ~6 more gets the motherboard out. The board is simple, only 2 layers, and you can debug it with a logic probe and not really much else. Most chips have fairly distinct functions, except the VIC-2 and SID chips which each handle a laundry list of things aside from their primary jobs of generating video and audio signals.
It’s an interesting machine because it is a fairly consistent platform. People still write demos and games, and they still run on pretty much any Commodore 64. Well OK, you probably need a PAL one, but that’s a single jumper, a different VIC-II, and a different clock away. (Someone this October just created a module that lets you switch by using 4 relays that connect to the jumper, 2 VIC chips and 2 clocks. I installed this in my C64.) You can count instructions, race the beam, flip registers mid scanline, and all kinds of fun stuff, and it will probably work on another C64 just the same.
The community has created some seriously cool stuff, both software and hardware wise. Hardware wise the 1541 Ultimate-II is mindblowing. It plugs into the userport and floppy drive ports (and optionally, datasette port) and emulates, with cycle accuracy and even a speaker producing drive-like noises, a Commodore 1541 floppy drive, a REU memory expansion, and a host of other devices. It even has ethernet for FTPing to.
In short, the thing is, it’s quite honestly still fascinating. It is a computer you can understand, yet seemingly holds unlimited tricks, and there’s an enormous ecosystem that is somehow still growing.
- deleted 7y ago[deleted]
- tabtab 7y agoTo clarify, "PAL" refers to the European TV standard, correct? Commodore had to make a different sub-model for Europe versus US because the TV signals are governed by different standards in each continent. The screen refresh rate in particular is different. Some software depended on (assumed) one or the other, probably because it was intended to be continent-specific or used hardware tricks to squeeze out higher perceived performance.
- jchw 7y agoYes and yes. The different PAL version though, was the exact same mainboard. In order to support PAL or NTSC, they have only two real differences: the clock and the VIC-II chip that generates the video signal. By my understanding, for simplicity and to make it cheaper to manufacture, the machine is largely driven by a single clock, and that clock revolves around the pixel timings for the respective video standards. You need the PAL VIC-II for a lot of software because a lot of its coded for PAL, and in the best case, runs too fast (and in the worst case, crashes violently because its cycle counting beam racing tricks don’t line up right.) (Fortunately, modern LCD TVs dont care very much and decode PAL signals fine. Though the cheap one I’m using seems to frequently assume its NTSC50, where the picture is correct but black and white - what the hell outputs that?)
- reaperducer 7y agoWas there a SECAM version? I remember a lot of French software for the 64.