4 ms·
A silly floppy trick that can sometimes confuse people: 1. Hold a floppy disk up by the edges. 2. Stick your finger through the center hole, so that the side
by tzs 7y ago
A silly floppy trick that can sometimes confuse people:
1. Hold a floppy disk up by the edges.
2. Stick your finger through the center hole, so that the side of your finger is resting on the edge of the hole.
3. Start moving your finger clockwise around the edge of the hole, which should cause the disk to rotate within the sleeve.
4. Watch the index hole in the sleeve. As your finger motion causes the disk to rotate in the sleeve, you should eventually see the index hole in the disk pass by the index hole in the sleeve.
5. From the motion of the index hole, you will see that the disk is rotating counterclockwise! But you are moving your finger clockwise--so what is going on?
- hanniabu 7y agoThere's some wiggle room in the floppy so when you move your finger around the hole like that it's pushing the disk to the edges of the casing. So to help see what's happening here, imagine the casing is 10x10in, the disk is 5x5in, and the hole in the casing is 3in circle. If you're moving your finger clockwise starting by pushing your finger up, the center of the disk is centered with the casing. Move your finger to the right and the disk rolls on the top edge for a bit (spinning counter-clockwise) before you start coming around the inner circle and the disk comes off the top edge and to the side edge. As you are moving your finger clockwise, the disk is pressing against the edges causing it to roll counter-clockwise.