2 ms·
Due to component tolerances, laptops aren't that picky about what voltage they need; capacitors with 16V and 25V max ratings have basically created two ranges,
by userbinator 7y ago
Due to component tolerances, laptops aren't that picky about what voltage they need; capacitors with 16V and 25V max ratings have basically created two ranges, 9-12V and the far more common 18-20V:
https://news.ycombinator.com/item?id=12618406 https://news.ycombinator.com/item?id=12618406
I find the other comment about a programmable output voltage in 50mV increments a little amusing, since 50mV of 5V is 1% and of 20V is 0.25%. To maintain the former level of regulation over changing loads would already require a very expensive and powerful supply with remote sense, while the latter is basically voltage reference territory.
- sokoloff 7y agoVoltage refs are more typically 2 orders of magnitude better than that.
- userbinator 7y agoBetter references, yes, but 0.25% is typical of a cheap reference like a '431.
- sokoloff 7y agoI stand corrected; thank you. I am genuinely surprised to learn that those are called voltage references, but that is an accepted industry term.
- oxplot 7y ago> I find the other comment about a programmable output voltage in 50mV increments a little amusing To clarify, when you program the chip, you set a voltage with 50mV resolution and a lower and upper percentage bounds that you'll accept. The minimum percentage is 5%. So for instance, at 5V, you can't narrow down the range to less than 0.5V (4.75-5.25v).