4 ms·
This is incredible, something like this becoming mass market would remove the issues we have of older laptops not having easily replaceable power bricks.
by dijit 7y ago
This is incredible, something like this becoming mass market would remove the issues we have of older laptops not having easily replaceable power bricks.
- mschuster91 7y agoThis design does lack a configurable dc/dc voltage regulator, I've seen laptops with anything between 12-24V... any idea for a circuit?
- botto 7y agoyou could hang one off the output, not the most elegant but at least modular then
- sorenjan 7y agoThe STUSB4500 supports output voltages of 5V to 20V in 50mV increments and is programmed over I2C, so it should be pretty easy to add a small micro controller and some input interface to make the output voltage configurable.
- userbinator 7y agoDue to component tolerances, laptops aren't that picky about what voltage they need; capacitors with 16V and 25V max ratings have basically created two ranges, 9-12V and the far more common 18-20V: https://news.ycombinator.com/item?id=12618406 https://news.ycombinator.com/item?id=12618406 I find the other comment about a programmable output voltage in 50mV increments a little amusing, since 50mV of 5V is 1% and of 20V is 0.25%. To maintain the former level of regulation over changing loads would already require a very expensive and powerful supply with remote sense, while the latter is basically voltage reference territory.
- sokoloff 7y agoVoltage refs are more typically 2 orders of magnitude better than that.
- userbinator 7y agoBetter references, yes, but 0.25% is typical of a cheap reference like a '431.
- sokoloff 7y agoI stand corrected; thank you. I am genuinely surprised to learn that those are called voltage references, but that is an accepted industry term.
- oxplot 7y ago> I find the other comment about a programmable output voltage in 50mV increments a little amusing To clarify, when you program the chip, you set a voltage with 50mV resolution and a lower and upper percentage bounds that you'll accept. The minimum percentage is 5%. So for instance, at 5V, you can't narrow down the range to less than 0.5V (4.75-5.25v).
- chx 7y agoSee my comment https://news.ycombinator.com/item?id=21269137 https://news.ycombinator.com/item?id=21269137 for more.