3 ms·
I got a CO2 meter out of curiosity. They are, indeed, about US$150. I get a little under 500ppm indoors. Incidentally, humans can tolerate much higher CO2 leve
by Animats 7y ago
I got a CO2 meter out of curiosity. They are, indeed, about US$150. I get a little under 500ppm indoors.
Incidentally, humans can tolerate much higher CO2 levels with accommodation, but, as with altitude, it takes days. The US Navy submarine people have done considerable work on this. So this is not a global warming issue.
Real CO2 sensors are still about US$60 as a part. The standard sensor has a heating element, and uses about 75mA, so this isn't suitable for battery operation. 1mA sensors are now available, but for US$160 or so. This cost problem is holding back widespread use in HVAC systems. HVAC systems for rooms where the people load varies widely (classrooms, offices, hotel function rooms, restaurants) should have a CO2 sensor to tell how much outside air you should be pulling in. But outside of hotels, they're rare.
Cheap "air quality sensors" measure volatile organics, which is something else entirely.
- joecool1029 7y agoFWIW I have had this cheap CO2meter for a few years and it seems to work just fine. https://www.co2meter.com/products/co2mini-co2-indoor-air-quality-monitor https://www.co2meter.com/products/co2mini-co2-indoor-air-qua... Windows open? Drops into 600ppm range. GF and I at home with closed windows and HVAC off, usually climbs into 1200pm range. Gas oven on? Easy to get over 3000ppm if there's no ventilation on. > But outside of hotels, they're rare. I haven't made it a point to look in all of them, but I've seen quite a few in microbreweries in the room they do their brewing. Not sure if required by law, but it's generally a good idea.
- thoughtstheseus 7y agoLarge industrial facilities often track air quality, usually in certain areas, to prevent accidents.
- 05 7y ago$20 on AliExpress. https://www.circuits.dk/testing-mh-z19-ndir-co2-sensor-module/ https://www.circuits.dk/testing-mh-z19-ndir-co2-sensor-modul...
- tgsovlerkhgsel 7y agoThat + one of these ESP8622 or ESP32 dev boards with a display is an easy way to make a home-made cheap air quality monitor.
- tda 7y agoAdd a Pms5003 and a bme280 and you can measure temperature, humidity, air pressure, CO2, and PM10 (particulate matter) all for about $45
- jonathanwallace 7y agoIs there a tutorial on how to do this? Or what would I search for to find such a tutorial?
- lnsru 7y agoStart reading data sheets of mentioned parts. Stick them to some Arduino and write code. These measurements aren’t special in any way.
- tda 7y agoThough it really depends on what you want to do with the data, I can really recommend to use esphome in combination with homeassistant/influxdb/grafana. You can configure the sensors with a simple yaml file, compile and upload to the chip and then add it to a homeassistant dashboard. Long term trends can be queried from influxdb and presented in a grafana dahboard
- t34543 7y agoCO2 meters are required by code in most commercial spaces, cost isn’t a factor. See sick building syndrome.
- amluto 7y agoSome of the makers of the VOC matters suggest that they are better for this purpose than CO2 as they detect exhalation and off gassing. And maybe body odor, too.