3 ms·
WRT3200ACM – Any Fail Safe, or Dual Boot Options?
- rolph 7y ago03-26-2017 05:12 AM If you have a different firmware in the router's alternate image location you can manually switch to it by turning the router on and off three times in a row right when the LAN LED starts blinking. If you like to use 3rd party firmware on you router this is a failsafe function in case you do something your router cant handle. the problem is the power to the router can be interrupted at a number of points such as the wallwart plug, the ciruit breaker at the main fuse panel, faults or brownouts on the utility side of things. I had this sort of thing happen often just out of accident, when the power fails it often cycles in and out until blackout. this is enough to put it into an alternate partition, and its a PITA when it happens so i use a UPS to plug into, and problem solved. https://forum.archive.openwrt.org/viewtopic.php?id=50173&p=10 1. Reset the router by holding the reset button in until the PWR light starts to flash {mine takes about 15 sec's} 2. Once the power light stops flashing, you can power off the router with the power switch. 3. Turn the power back on and the PWR light will light. As soon as any other light turns on, power off the router with the power switch. 4. Turn the power back on and the PWR light will light. As soon as any other light turns on, power off the router with the power switch. 5. Turn the power back on and the PWR light will light. As soon as any other light turns on, power off the router with the power switch. 6. Turn the power back on and the PWR light will light. This time just let the router power all the way up. It should now be on the alternate firmware. Yes, you will power off three times. Hope this works for you-all... this procedure was posted in 2014, and we have here in this submission, the same sort of proceedure, so this at this point has been the case since at least 2014. this is one brand name of router but any product that reverts firmware or OS in this way ["counting boot failures"] will do some unexpected things Here is a good place other than openWRT to browse if you really want to get into the sport. https://www.linksys.com/us/support-article?articleNum=164513 https://www.linksys.com/us/support-article?articleNum=164513