10 ms·
I don't believe that. If you slam on the brakes hard every time you need to slow down a bit you're going to go into a tail spin and die especially at f1 speeds.
by stjohnswarts 7y ago
I don't believe that. If you slam on the brakes hard every time you need to slow down a bit you're going to go into a tail spin and die especially at f1 speeds.
- dpark 7y agoIf you’re braking gently the F1 car behind you will absolutely pass you immediately and then brake hard to make the corner. If you lose control under hard braking it means you chose to brake at the wrong point.
- sandworm101 7y ago>> every time you need to slow down a bit In racing that is not a thing. There is never a situation where a car needs to "slow down a bit". The goal is to stay as fast as possible as much as possible. That means either going flat out (either in speed or cornering) or be under maximum braking (to minimize time at lower speeds). If you are ever "a bit" too fast then you have made a mistake. You began braking too late. On the next lap you will alter your braking point, not adjust your braking pressure. >> tail spin Also not a thing under braking. "Tail spins", or to use the correct term oversteer occur when a rwd car applies too much power (or some 4wd). The back end slips. When you brake too hard entering a corner the front wheels will depart first, causing an understeer rather than a tailspin. The car will push forwards and fail to turn.
- iamaelephant 7y agoMaybe if you're not into motorsport you should not comment on it. You're wrong. Especially in highly aero dependent cars like F1 cars, where you can achieve maximum braking pressure at top speed due to the down force. The parent commenter is also wrong, brakes in F1 cars are certainly not either full on or full off, the drivers trail brake into corners so although the driver begins braking at maximum force, they slowly release the brake as the car enters the corner and starts turning.
- kube-system 7y agoYeah, there’s a lot of misinformation all around here. Not to mention that production cars have a lot different dynamics than an f1 car. They’re designed with very different chassis goals in mind, so they’re going to exhibition very different behaviors around a track. I have a few days experience on track with an SCCA instructor. Braking late and at maximum deceleration is the basic idea, but braking can do lots of things and be used lots of ways. A light application of braking is sometimes important, not to slow the vehicle, but just to transfer weight to the front wheels before a turn. Also, it is possible to use light braking to induce some rotation mid-turn, especially in an FWD vehicle like a Leaf that will likely exhibit significant understeer. Driving a car around a real track is humbling for the first time. The first event I was at, some instructor was taking a few laps with his personal Chevy Volt, and he was effortlessly passing students in a variety of high dollar sports cars.