5 ms·
SmartyKit Apple I replica
- randogogogo 7y agoIs anyone else seeing OpenDNS security warnings on the headlone link to the site?
- piccogabriele 7y agoyes
- deleted 7y ago[deleted]
- pvg 7y agoI wonder why an Apple I? Are they perhaps concerned about IP-related problems with the ROM and other firmware in the II? They're pretty similar but the latter is still easily recognizable as a personal computer and the former not so much.
- zcrackerz 7y agoWasn't the Apple I originally shipped as a kit that you had to put together? I think it's trying to recreate that same idea, but with easier assembly.
- pvg 7y agoThat could be it, although I guess they also have some earlier kit that seems to be capable of more. But maybe this can too - the 'screenshots' on that page show things an Apple I doesn't do as it is, like display lower case letters. I just have a hard time seeing how the end result can hold a kid's interest. An Apple II can be made to fill the screen with rude words in a line of code!
- benj111 7y agoDon't have to worry about a case? If I ordered an Apple II replica I'd expect an apple II case and keyboard which might present IP and manufacturing issues.
- pvg 7y agoI think it's intended to be a kit for children rather than a strict 'replica'. A no-solder kit that ends up pretending to be some ancient computer can pretend to be more or less any kind of ancient computer.
- duskwuff 7y agoThe Apple II is significantly more complex. In particular, its video output architecture is constructed around the DRAM refresh cycle, making it difficult to replicate without duplicating most of the original system.
- csixty4 7y agoIt's a lot easier (not to mention cheaper) to get a working Apple II. Lots of folks out there want the chance to meet around with an Apple I for less than $100k.
- pvg 7y agoIt's supposed to be a kit for kids, not really a thing for collectors. It's historically important but I find it hard to come up with a more limited and boring computer of similar vintage. It's basically a prototype idea a few of which they managed to sell to hobbyists. What do kids or non-kids do with this thing after they've plugged it together?
- jhbadger 7y agoThat depends on what you mean by "similar vintage" of the Apple I. The Apple I was actually one of the more exciting computers when the Steves presented it at the Homebrew Computer Club in 1976. Remember it was competing with things like the Altair and IMSAI, not the graphical home computers of the 1980s like the Commodore 64.
- pvg 7y agoHeh, no, I think it depends on what I mean by 'boring' and it's 'not of great interest, as a working, interactive thing, to learners today'. A fully realized Altair or IMSAI is a system that runs BASIC and CP/M - not just a box with switches and blinkenlights. A fully realized Apple I is... an Apple ][. I'd put the minimum required level of retro-PC non-boringness somewhere around 'should be easy to make it infinitely yell BUTTFACE at you shortly after booting'. An Apple I that just drops you into monitor ROM seems well below that.
- comex 7y agoThe bottom photo shows an ATmega328P. So this is just a software emulation of an Apple I? What’s the point?
- greatjack613 7y agowas wondering the same. Just run an emulator on your raspberry pi, no need for a single use kit
- michaelmior 7y agoEven if it's an emulated Apple I, the kit looks like fun :)
- sergpanarin 7y agoThanks!) But it’s not emulated - it uses microcontrollers for keyboard&video and original CPU 6502 with ROM/RAM to do the work. Original Steve Wozniak’s code is on ROM. ROM chip is bigger then in the original and it’s possible to load BASIC interpreter or other programs and run them from ROM
- jhbadger 7y agoI think it is just there for generating the video signal. This sort of thing is common. The earlier (solder-based) Briel Replica I Apple I clone used a Propeller chip for that. But it still had a 6502 for the actual computing, and I imagine this does too.
- randrews 7y agoI'm really curious how they're doing video. That was the big roadblock I hit when making a Z80 computer a while ago (and what led me to FPGAs).
- LeonM 7y agoThe photo is low res, so can't say for sure, but I expect it uses a microcontroller of some sorts to generate a composite video output.
- randrews 7y agoThat's a lot harder than it seems, so, I have my doubts. It needs to not only run fast enough to bit-bang the signal but also simultaneously respond to bus requests from the 6502.
- duskwuff 7y agoThe microcontroller doesn't go on the 6502 memory bus. If data is sent to the microcontroller over a serial channel (e.g, SPI or UART), it can handle incoming data during blanking periods.
- phaedrus 7y agoAll depends on which microcontroller it is using. The Propeller microcontroller has multiple cores and specialized registers for video, so it can just dedicate independent core to video and bus control. An Arduino is certainly fast enough to bit bang video, and it could probably interleave bus control between servicing pixels, but the code and timing for that would get complex.
- deelowe 7y agoThere's no graphical display on the apple I. You just need the atmel to handle the big banging. The rest is uart and there's quite a number of PAL and NTSC composite libraries out there that can do this for arduino.
- sergpanarin 7y ago
- jquast 7y agoI really enjoyed building and programming on the Briel Computers Apple I replica, http://www.brielcomputers.com/wordpress/?cat=17 http://www.brielcomputers.com/wordpress/?cat=17
- jasoneckert 7y agoBuilding, exploring, and programming the workings of early computers builds foundation knowledge that helps with a wide variety of newer technologies. It's good to see projects like this, in my opinion.
- crumpled 7y agoSerious question: Do kids want to do this? Is this mainly for geeky adults.
- Sendotsh 7y agoBit of both. Kids like making things with their parents, and geeky parents are more likely to spend the time making stuff with their kids if there’s a fun nostalgia trip for themselves at the same time. I’ve done a lot of retro gaming projects with my kids because I get some nostalgia, they learn how to make things, and we all get to play some games at the end. It’s fun for everyone.
- lisper 7y agoAlso worth looking at if you're into this sort of thing: https://www.reactivemicro.com/product/replica-1-plus-from-briel-computers/ https://www.reactivemicro.com/product/replica-1-plus-from-br...
- tyingq 7y agoWhy so little information on this thing? It doesn't even mention if it's using a real 6502, which one, etc.