3 ms·
We found that the capacitors were all in good shape with the proper capacitances. This is in contrast to modern capacitors, which often leak or fail after a few
by userbinator 7y ago
We found that the capacitors were all in good shape with the proper capacitances. This is in contrast to modern capacitors, which often leak or fail after a few years. NASA used expensive aerospace-grade capacitors and X-rayed each one to test for faults, and this made a large difference.
That's also because these are hermetically sealed wet tantalum caps, not the dry type that's notorious for shorting out and catching fire. "Wet tants" are very expensive and you can still buy them today:
https://www.mouser.com/Vishay/Passive-Components/Capacitors/Tantalum-Capacitors/Tantalum-Capacitors-Wet/HE3-Series/ https://www.mouser.com/Vishay/Passive-Components/Capacitors/...
We were somewhat surprised that both power supplies worked flawlessly after 50 years.
I'm not all that surprised, actually --- but perhaps that's because I've seen plenty of videos on YouTube of more mundane equipment, like vehicles and appliances, coming back to life after several decades of storage or exposure to the elements with minimal repairs, so for a clearly high-reliability component like this AGC PSU to work is almost expected.
- drsopp 7y agoI don’t understand downvotes for this.
- baybal2 7y agoYes, tantalum caps are hard to beat, and China has a near monopoly on them, and coltan refining. Even "Made in USA" "military" Kemet and Kyocera caps are only packaged in USA, with bulk film still being produced in China.
- chiph 7y agoThat's fairly recent then. They have a video from 2012 where they show them building the ceramic sheets on carrier film. https://www.youtube.com/watch?v=gFEYuaY35Vo https://www.youtube.com/watch?v=gFEYuaY35Vo The interesting detail to look for in the video is the LCD with the yield on it - 84% of the capacitors tested within 4.5% of target, and 15% within 9.5%. This must not have been the space-rated product line :)
- baybal2 7y agoMLCC caps are not tantalum caps
- xellisx 7y agoWorking link: https://www.mouser.com/Vishay/Passive-Components/Capacitors/Tantalum-Capacitors/Tantalum-Capacitors-Wet/_/N-75hr5?P=1z0zls5 https://www.mouser.com/Vishay/Passive-Components/Capacitors/...
- jakeogh 7y ago$/F record? https://www.mouser.com/ProductDetail/Vishay/XTV157T270P0L?qs=sGAEpiMZZMuEN2agSAc2ptl%252BlXX0IRpaER3axfKJ7FA%3D https://www.mouser.com/ProductDetail/Vishay/XTV157T270P0L?qs...
- deleted 7y ago[deleted]
- walrus01 7y agoAre wet tantalum capacitors still used in really mission critical things, like whatever steps down engine alternator supplied voltage on a f22 to avionics circuit board level voltages?
- sephamorr 7y agoWet Tantalum caps have terrible vibration/shock sensitivities. I would use ceramic caps in aerospace 100 times out of 100 rather than consider wet tantalums. At least ceramics are repeatably manufactured and can be mounted J-lead to reduce shock loads. The tants will just randomly break open on you. Not sure what they're currently used in, but I wouldn't consider them for new applications.
- jakeogh 7y agoWhen are the wet's used?
- thewonderidiot 7y agoDid it use wet tantalums, though? If the alternative is "solid tantalums", then it didn't -- SCD 1006755, the only type of tantalum used in the computer, specifies them as "Capacitor Fixed, Electrolytic, Solid Tantalum". Our computer has KEMET KGxxJyyKPS parts (xx=capacitance, yy=rating), but they also at least evaluated Sprague 150D, 151D, and 350D to fill the role (and utilized at least one of them).
- deleted 7y ago[deleted]