5 ms·
J-Core Open Processor
- cereal_console 7y agoI recently did technical deep dives on my late model Volvo XC90 and XC60. I was amazed to still see SuperH SH4 processors in use in various parts of the telematics system.
- xeeeeeeeeeeenu 7y agoAll CASIO graphing calculators use them too.
- bpye 7y agoHad fun hacking on one of these calculators back in secondary school.
- Matthias247 7y agoI worked in automative for lots of years. Up until around 2010 SH4 was mostly the dominating architecture for infotainment systems. Either with Windows CE or QNX running on top of it. Due to long development and product cycles as well as software reuse new cars with SH processors might have been released up to much later points in time.
- mattst88 7y agoOh, the website is back up. It's been down for months and the project seemed to have gone into stealth mode (or maybe died). Still no news for about three years though. Unsure why this is being posted now, unless I've missed some news. Interesting project, if it is still alive.
- eggsome 7y agoI think they are still alive, there are some talks like this one that are not listed on their website: https://www.youtube.com/watch?v=o0milqmt4ao https://www.youtube.com/watch?v=o0milqmt4ao Personally I think they need someone with the time to engage with/build a community. At the moment they only seem to have people actually building things, nobody is acting as an evangelist.
- freemint 7y agoNeat, i've been following them for years but never saw that one!
- drudru 7y agoI think they are still alive, and I think the project is interesting. They never did ship their little turtle fpga board. Also, it seems like it just didn’t catch fire like the RISC-V project has.
- ch_123 7y agoThey had a rather ambitious roadmap, seems like they didn't make much progress past J2 (as least in terms of what has been released)
- freemint 7y agoThere is a J1 release: https://github.com/cr1901/jcore-j1 https://github.com/cr1901/jcore-j1
- zokier 7y agoOh Renesas are ex-Hitachi; well that explains a lot how such a unfamiliar name is one of the top chip companies. Reminds me of the convoluted pattern where Motorola split into Freescale who were acquired by NXP who in turn are ex-Philips. Occasionally I feel the need for some sort of chart of the semi industry to keep track who is who.
- bgorman 7y agoFun fact: Broadcom is now actually a former HP spin-off spin- off (HP->Agilent->Avago), but is now worth more than Hewlett Packard Enterprise, HP Inc, Agilent and Keysight combined.
- ksec 7y ago> Broadcom is now actually a former HP spin-off spin- off (HP->Agilent->Avago) Um... Not Strictly true. Broadcom is; Broadcom. Avago purchased Broadcom, and uses its name, but traded using AVGO ( I could never understand why ).
- jchw 7y agoNeat, although I’d like to hear some motivations and maybe how it stacks up to other open cores. > Numato provides a GPL-licensed python3 tool to flash bitstreams onto their board. [TODO: port to python 2] Well, they have a great sense of humor.
- snvzz 7y ago2014.
- freemint 7y agoThere was a publication in IEEE COOL Chips 21 (2018) [978-1-5386-6103-1/18] which compared a closed source implementation by a company (whose founder was involved in the creation of SuperH i think) of SH2 with RISC-V and an historic (pirate (as in patents were not expired then)) implementation of SH2 called Aquarius by some hobbyist. The comparison seems to have some methodological flaws. But one result is, that is unaffected by them in my opinion is "that 2 stage SH2 re-implementation" needs fewer FPGA resources than "that 2 stage RISC-V re-implementation" on the same hardware at the same clock. That honestly does not say much but it is the best comparison i am aware of.
- tachyonbeam 7y agoNeat, but it looks like this hasn't been in development since 2016. I would think it's probably best to use a RISC-V design if you want an open RISC CPU core to put on an FPGA. You'll get better compiler and tool support, and probably a wider variety of available designs.
- ncmncm 7y agoI am seeing more and more of what look like viable alternatives to RISC-V. Agner Fog has an ISA with vector instructions that should influence all future designs. The Bitmanip extension to RISC-V is likewise an education, and should inform any future designs. RISC-V itself? The core design seems very academic. Seriously, who omits rotate instructions?
- Taniwha 7y agoSomeone trying to minimise gate counts (a full barrel-shifter is an N squared sort of thing) People forget that RISC comes out of researchers doing analysis of instruction use, and removing stuff you don't use much - if you can bump the clock speed by 5% by halving the size of a full barrel-shifter then you can execute more instructions per second even if you have to use 3 to do a rotate
- sifar 7y agoROT (and shifts) is N log N. Look at shuffle networks. If you have shift operations in the core, their is no reason you cannot have a ROTATE operation. It doesn't add much additional HW.
- Taniwha 7y agoit adds to gate delays (especially when N is 128 - a 128 fan in is pretty expensive in space and time)
- CalChris 7y agoYeah, RISC-V omitted rotate from its 47 instruction base ISA. You don't get to be that small without cutting the unnecessary and rotate would require a barrel shifter which in turn would rarely be used. Instead, rotate (rol, ror, rori) can be found in the “B” Standard Extension for Bit Manipulation.
- ncmncm 7y agoRotation costs exactly the same to implement as shifting, and shares the same hardware, so has about zero marginal cost. "Academic."
- freemint 7y agoI've been following them for a while. The community communication has lot's of room for improvement. For example the mailing list is down for over an year. The website is not really updated. All communications happens p2p over eMail or is not logged like the IRC. This is frustrating. Their roadmap did not work out because no plan survives contact with the enemy. From what i gathered J4 and J64 were targets in which there was not so much interest. (The customer demand was for J1 and even smaller ones from fabs who want to add it to their library.) They actually made it past J2 since J1 is available here https://github.com/cr1901/jcore-j1 https://github.com/cr1901/jcore-j1 . Note: this is hosted by a community member not J-Core itself. The past development model seem to have been: Develop solution in house for client at SE-Instruments, ask if they can open source it later. There was a push on #j-core on Freenode for a new source release last week but nothing has materialized yet.