5 ms·
Please don't dump your solvent down the drain like every Silicon Valley fab did back in the day, poisoning the entire region for decades to come. Just look up h
by hammock 7y ago
Please don't dump your solvent down the drain like every Silicon Valley fab did back in the day, poisoning the entire region for decades to come. Just look up how many EPA Superfund sites are in the South Bay due to trichloroethylene, TCE contamination. Dispose of it properly and safely.
- SkyPuncher 7y ago> Dispose of it properly and safely. I see a lot of people say this, but I rarely see any actionable advice. How does your average residential person find and dispose of chemicals like this? Seems like most people end up pouring them down the drain simply because they don't know how to actually find a better means of disposing them.
- henryfjordan 7y agoA person doesn't get a pass on things like this because other people didn't spoon-feed them the info. Read the law, call the EPA, google it. Ultimately if you want to use chemicals that have the potential to poison our shared environment you need to be willing to do the legwork to be confident that you are doing things responsibly.
- j88439h84 7y agoWe don't give people cars without a test. Perhaps such chemicals shouldn't be dispensed without training.
- __jal 7y agoI don't know, but if I were doing this, I'd find out. Call your residential waste management company and ask them who handles commercial hazmat in the area, if you can't think of any other way to start. If you're planning out your own home fab, you're researching a bunch of other things and giving serious thought to a lot of nontrivial problems. Choosing to ignore waste disposal is irresponsible, and you deserve any legal hassle you run in to.
- esmi 7y agoJust google hazardous waste disposal and give it your location. My experience is in the US, and here many counties have something like this: https://www.sccgov.org/sites/rwr/hhw/Pages/What-is-Household-Hazardous-Waste-and-How-do-I-Dispose-of-it-.aspx https://www.sccgov.org/sites/rwr/hhw/Pages/What-is-Household...
- opencl 7y agoYour average residential person doesn't have a homemade semiconductor manufacturing facility in their garage either, I'm sure getting into contact with local waste disposal agencies is a far easier task than building all this stuff.
- jefftk 7y agoIf you're in MA the link is: https://www.mass.gov/info-details/safely-manage-hazardous-household-products https://www.mass.gov/info-details/safely-manage-hazardous-ho... Other states probably have similar things? Very much worth researching before you get into a hobby where you start accumulating hazmats!
- inferiorhuman 7y agoI rarely see any actionable advice. How's this? If you don't know how to safely dispose of the toxic chemicals used in chip fabrication don't fabricate chips at home.
- bsder 7y ago> I see a lot of people say this, but I rarely see any actionable advice. If you have industrial quantities of chemicals (more than a gallon or so), you need to call the relevant entities. If you are lucky enough to have a hazardous waste disposal locally, obviously use that. If you have stuff that doesn't break down well in water (cooking grease, for example), pouring that down the drain is always a recipe for trouble. You're simply going to clog your pipes. You need to dispose of that properly. There is a reason why restaurants have grease traps. Normally, residential quantities of this stuff can be placed in normal trash. You can try to dispose of motor oil at gas stations, service stations, etc., but a lot of places won't take oil from end consumers anymore as it may be contaminated and their recycler will charge them. I actually had a very difficult time disposing of motor oil about 15 years ago. (I don't do my own oil changes anymore for this reason). I got told by the local enforcement "At the end of the day, dishwashing liquid and pour it down the toilet and the sewage treatment plant will chew it up the rest of the way." Obviously if everybody does this, it's a problem, but if it's really a one-off, it's okay-ish. If, however, your stuff is soluble in water and you have a relatively small amount of it and your waste goes to a sewage treatment plant, pouring it down the drain while diluting it with a lot of water is often your only choice (be careful--solvents and acids can produce fairly noxious vapors even when diluted heavily) Quite often industrial disposal sites simply will not take small quantities of waste from individuals as there are liability issues involved. Now, you may not like what even a dilute solution does to your plumbing, but that's a different issue. If your sewage doesn't go to a sewage treatment plant, but instead goes to something like a septic system, then you probably don't want to do this. DO NOT POUR STUFF DOWN STORM DRAINS. Those normally do NOT go to sewage treatment plants (there are exceptions--but they are rare) and, as such, are a really quick way to contaminate the environment.
- asteli 7y agoPSA: here in the SF bay, auto parts stores all have oil recycling receptacles. Check with them before you go and put it down the drain, surfactant or not. For other substances, there are also hazmat acceptance sites around, although they seem to keep annoying hours.
- 6nf 7y agoYour local rubbish service will point you in the right direction.
- fluffything 7y ago> How does your average residential person find and dispose of chemicals like this? How do you dispose electronics? Batteries? Oil? Tires? Cars? Furniture? construction materials? ... You go to the webpage of your local garbage disposal authority, and read their FAQ, which typically contains where all their disposal centers are, their addresses, opening hours, etc. and what can you dispose on each one. If what you want to dispose is not listed anywhere, you call them and ask them. In my country if you want to buy these types of chemicals, you need to ask a company for a price, and the company will ask: who are you? what do you want them for? what's your process for the chemicals? Etc. If you fail to answer any of the questions, they are obligated to report that a "sketchy" party tried to buy some chemicals from them. That might get you a visit from the police, asking even more questions. That's balancing your freedom to do whatever you want with chemicals with my freedom to enjoy a world that hasn't been polluted by idiots that didn't know what they were doing.
- basementcat 7y ago> Please don't dump your solvent down the drain like every Silicon Valley fab did back in the day, poisoning the entire region for decades to come. +1 Please develop a workable waste disposal strategy BEFORE thinking about cool disruptive home brew nanofab MEMS/circuit hacks.
- deleted 7y ago[deleted]
- hinkley 7y agoThere are a few things I don't want disrupted, and my endocrine system is one of them.
- m0zg 7y agoSpeaking of which, does anyone know where (in the US) I can safely dispose of ferric chloride, sulfuric acid, and hydrochloric acid? I used to etch my own boards years ago. And ever since then the spent stuff just sits in glass jars in a double plastic box in my garage. I don't etch anything anymore, and it's taking up space.
- segfaultbuserr 7y ago> safely dispose of ferric chloride, sulfuric acid, and hydrochloric acid The first step is easy: neutralize them with any base, such as baking soda. You don't need precision, just add a lot of it, and make sure the pH is close to 7 (or beyond, baking soda is not corrosive) at the end. After this step, the solution is no longer acidic or corrosive and much safer to handle. Unfortunately, the next step is tricky. The solution is safe, but it still contains a lot of Cu+ ions, which is a heavy metal pollutant and poisonous. On the other hand, if your sulfuric or hydrochloric acid is unused for etching anything (clean without those nasty ions), you are good to go, just dump them in the sink after you've neutralized them (test with pH paper) it's perfectly safe.
- m0zg 7y agoIs this what people actually do? I mean I'm aware I could neutralize them, but Cu is still going to be in there and I still can't pour this stuff down the drain. Then there's ferric chloride which is just nasty stuff that will likely stain everything it comes in contact with. I just want to get rid of it in a fully environmentally safe way.
- segfaultbuserr 7y agoDon't ask me, I don't know, as I'm asking the same question. I'm waiting for some answers to my question: https://news.ycombinator.com/item?id=20659004 https://news.ycombinator.com/item?id=20659004
- parsimo2010 7y agoI'm not sure it is economical, but I had some Sodium Persulfate etchant that was full of copper and accidentally dropped a piece of steel in it. The copper plated onto the steel almost instantly. You could probably use iron filings (or some metal that won't dissolve in your acid) to pull most of the copper out of the acid, and then neutralize. I'm not sure what you would do with the solid copper after that. It might take some effort to get a system that was reliable and economical, but the basic idea of precipitating out the copper before neutralization should work.
- wrycoder 7y agoI ran a small fab on the peninsula back in the day, and we certainly didn't dump any trico down the drain. We did put a small amount of propanol (used to switch from a water rinse to trico drying) down, but that's pretty harmless. The trico was taken away by a reprocessing company. It was still essentially pure - some of it contained a bit of dissolved photoresist or beeswax. I read through the OP - he's making good choices and doing it much as we did fifty years ago. I would have killed to get that maskless photolith setup, though. For a small fab (three furnace tubes, two fume hoods), the main issue is acids from photoresist ashing, wafer cleaning, tube etch cleaning, and metal etching. These are easily neutralized with a vat of marble chips built into the plumbing under the fume hoods. If you are doing this, avoid epitaxy, which involves arsine and phosphine. I would say never attempt those! You can buy epi wafers. Either use spin-on dopants like he did, or use oxidized boron nitride wafers and small amounts of phosphorous oxychloride like we did. The effluent from a plating facility or a dry cleaning establishment would be far more concerning. Our furnace and photolith operation fit in a 20 x 30 ft room. It was one of the leading operations of its kind in the world at that time.