3 ms·
I mean, the buyer doesn't, but the factory does. Ceiling fans function with ball bearings that are oiled, same as bicycles function with chains that are oiled.
by crazygringo 7y ago
I mean, the buyer doesn't, but the factory does. Ceiling fans function with ball bearings that are oiled, same as bicycles function with chains that are oiled. Obviously oil doesn't get into the air, but contact with water is a different matter.
I have zero knowledge about boat motors but had always assumed the oil leakage had something to do with lubricating movement of the propeller that also prevented sea water from getting in and corroding internal elements. Is this wrong? Do electric boat motors function completely without oil?
- dylan604 7y agoYes, electric motors function without oil. They're mainly magnets and coils of wire and are mostly* friction-less. Boat engines are the same concept as your car. Air, fuel, spark, piston. In fact, the boat my family had when I was a kid had an inboard/outboard setup. The engine was a Chrysler V6. It was fascinating to me as a kid because when the cover was pulled off, the entire engine was exposed and very accessible compared to it being in a car. Instead of a transmission connected to a drive shaft, it was connected to some worm gears that turned the prop. The main difference is a car's leaking oil mainly falls onto the streets (and gets diluted before hitting the water sources) where the boat's goes directly into the water.
- gingabriska 7y agoIf electric motor is anything like PC fan, than it should have bearing? My fans have either double ball bearing or sleeve bearing and last I heard there are also some maglev type of fans but I don't know if they are really maglev or they also have some kind of bearing. Will check later.
- jabl 7y agoElectric motors need bearings, but the bearings need a minuscule amount of oil compared to an internal combustion engine. Boats have something called a "packing box" which is a seal around the propeller shaft so that water doesn't leak into the boat. Traditionally they use hemp fibers and tallow, nowadays PTFE or similar is a popular alternative.