3 ms·
It's a relay-based computer. Basically as long as relays continue to be made (which is probably close to forever), it can still be serviced. Somewhat newer but
by userbinator 7y ago
It's a relay-based computer. Basically as long as relays continue to be made (which is probably close to forever), it can still be serviced. Somewhat newer but still old computers using custom ICs that stopped being made long ago would not have as good a chance of survival, and vacuum tubes are also relatively rare. But relays are still being made, and people still build relay computers for fun, as a quick search of the Internet will show; this is one of the more memorable ones: http://web.cecs.pdx.edu/~harry/Relay/ http://web.cecs.pdx.edu/~harry/Relay/
There's a similar analogy to this in the automotive world, where early cars were simple and one could easily service and maintain them, even fabricating new parts as necessary; at the same time, they're nowhere near as efficient as modern equivalents.
- Animats 7y agoIt's a relay-based computer. Basically as long as relays continue to be made (which is probably close to forever), it can still be serviced. Yes. And even then, the relays can be repaired. The NYC subway system has a shop that refurbishes the relays of their signaling system. I restore old Teletype machines. The ones from the 1920s and 1930s are the easiest to restore. They're mostly all steel and cast iron. Once you clean, oil, and adjust them, they usually work, unless the machine was seriously damaged. I have five running Teletype machines. The post-WWII machines are harder, but still repairable. The ones from the 1960s and 1970s are really hard, and some of the plastic parts have to be fabricated. The last Teletype, the Teletype Model 40 (1979-1984) appears to be hopeless. The print chain deteriorates over time, and making a new print chain, with all the little character slugs, would be a huge job. Restoring current electronics, with SOIC chips, will be hopeless after the ICs wear out.
- asteli 7y agoI helped a friend-of-a-friend debug some control circuits on an ancient drill press. I wondered "why not throw a microcontroller and some SSRs in here instead of dealing with all this goofy relay logic?" Then I realized that I was servicing a 50 year old piece of equipment, which would continue to be serviceable long after Microchip stops making ATMega328s.