2 ms·
It doesn't scale down like that. Small motors and small props under 7 inch size have less than 5g/watt thrust efficiency. If you look at the motor and propeller
by walrus01 7y ago
It doesn't scale down like that. Small motors and small props under 7 inch size have less than 5g/watt thrust efficiency. If you look at the motor and propeller setup that would go on an Armattan Chameleon Ti 7" for instance (a freestyle/gopro hero7 carrying sized FPV quad frame you add your own parts to).
On the large scale you would never actually be applying only 40W to a tmotor u8 with a 28" prop on it, because the total weight of the motors and the whole craft will mean it would just sit on the ground. You'd be moving air around like a fan and not lifting off. Ideally you would design a large octo for a 1:1 thrust ratio (hover) at about 48 to 50% throttle per motor, which is why you see the thrust tables starting from 50% and going upwards to 100% throttle.
Bigger and slower (lower kV) props and motors have higher efficiencies. If you google a bit about the few successful human powered helicopters that have been built in the past ten years you'll see the ultimate extent of using very big, very slow props to maximize lift per watt.
I would dearly love to be proven wrong on my above post. If you can find me a super efficiency triple junction GaAs panel to mount on top of a 20 kilogram sized coaxial filming octo, I'll find a way to get it into the hands of XM2 and see if they want to try flying it.