5 ms·
I picked up a wonderful concept from a teenage summer spent dry stone walling in the Cotswolds. When you pick up a stone from the pile, it MUST be placed on th
by jmkd 7y ago
I picked up a wonderful concept from a teenage summer spent dry stone walling in the Cotswolds.
When you pick up a stone from the pile, it MUST be placed on the wall. You either have to make it fit your intended spot through rotation or another adjustment, or you have to find another place on the wall for it. It CANNOT be placed back on the pile.
I'm sure these rules are not adhered to that widely but they had some great benefits.
1. You eye your intended location very well, thinking in 3D.
2. You pick your stone very carefully.
3. You learn something each time the stone doesn't fit.
Before too long this restrictive practice becomes an advantage not a hindrance, and has many conceptual parallels with other physical and mental tasks. It's a beautiful thing.
- ardani 7y agoLaying a brick is like a chess move! Thank you!
- dsr_ 7y agoThis is an excellent rule for cleaning up (a room, a house, an office...): touch any given thing once at most. In extreme cases, it doesn't work because you don't actually know where things are going to go, in which case a two-round approach is good: everything gets pulled out and sorted in round one, and things go to their destinations in round two.
- degenerate 7y agoThat's how I clean - pull everything out, assess, and put it all away. It's very efficient if you have enough space, but it drives people nuts because they see it as causing more of a mess.
- UI_at_80x24 7y agoI get scorned for doing it this way all the time!
- war1025 7y agoMy wife attempts to use this method, but usually gets distracted at peak-messiness and things just end up worse off than they started.
- bradknowles 7y agoNo, you can't blame your wife for that method. It was my method first. She must have stolen it from me. ;)
- FooHentai 7y agoAn issue with this approach is it turns 'cleaning' into a time-consuming task that needs to be completed to avoid making the situation worse. That can cause some folks anxiety and require a building up of sufficient willpower to even begin the task. Contrast that with a transaction-based approach to cleaning where an individual item is moved to it's destination place/state, then you move on to the next item. No middle state where things are worse, and you can stop at any time yet still have gained the benefit of any work completed to that point. However, with the second approach it's key that everything has a suitable destination 'home' to be moved to. Often, that 'home' is the trash can :)
- kortex 7y agoHeap sort vs insertion sort.
- debatem1 7y agoIt's interesting, I use precisely the opposite approach. I work in passes, each one intended to make the room cleaner as a whole but not necessarily finish any part of it. For example, let's say I've had a big party and the kitchen is a mess. Step one might be to put the trash can in the center of the room and dispose of all visible debris. Step two might be to move all remaining small objects to one side of the room to improve visibility, then repeat the trash pass. Step three might then be to wipe down the counters, which are now clear of objects. Etc. I tend to work in a similarly incremental way on programming tasks. Do you have a more "touch-once" approach there?
- 24gttghh 7y agoI always saw this type of advice in the lens of: "this thing is heavy. I only want to pick it up once otherwise I will exhaust myself fairly quickly." I learned that from laying sod on a golf course one summer...
- jnty 7y agoI see that rule as avoiding the search for perfection - otherwise you might spend hours picking up different stones and contemplating as if it were a jigsaw puzzle, when in actual fact there are 'solutions' everywhere.
- voxadam 7y ago"Perfect is the enemy of good."
- jgwil2 7y agoThis seems like it could be a (very) loose analogy for type-first programming. Before you start manipulating data (passing values to functions) you have to give careful thought to what data types you will need. If you do it right, there's far less rearranging (rummaging through the pile) needed later.
- timc3 7y agoHave also built stone walls in the Cotswolds, and I wouldn’t agree with you about not putting a stone you picked up back. Sometimes when you pick up from the pile you didn’t see part of the stone that makes it entirely unsuitable. It’s better to pick the best stone to complement the space than try and jam something in that sorts of fits. Have done it in the winter in a blizzard on the side of a hill - that was a painful experience, summer was much more enjoyable. Edit to say: I realise now from your username we know each other - hope you are well! ;-)
- jmkd 7y agoGood to see you here, am well thank you and I hope likewise! To your point, that's just the tradition I was told by the stonemason who built the walls I helped on. There's a subtle art to pre-examining the stones before picking, it wasn't a case of if you touched it, it had to be picked up. It was more if you committed to this stone then make it work in this spot or another. There's always a place :-)
- toddh 7y agoI use the same idea when stacking firewood.
- bayouborne 7y agoI'm not, or can't be, that disciplined. In a more general sense though, when I lay old brick up for walkways and patios, I have come to appreciate this odd zen-like state I fall into. I always have 5 or 10 deformed candidates on standby when there is a hole or a slot that a 'perfect' rectangular brick won't fit into. Imperfections are solved most easily by objects with other imperfections.