4 ms·
I think if you focus too much on "$35" you will be very disappointed with the rpi. You need a power supply, that's $10. You need an SD card, that's $10. You
by jrockway 7y ago
I think if you focus too much on "$35" you will be very disappointed with the rpi. You need a power supply, that's $10. You need an SD card, that's $10. You need a case, that's $10. You need a micro HDMI to HDMI cable or two, that's $10. You need a fan, that's $10.
If you mentally decide "the Raspberry Pi is a $100 computer all-in" you will be much happier. You won't buy one to sit in a drawer (as many on HN have complained about), and you won't try to use a USB charger from your phone from 1992 and that SD card you got with your sandwich at IKEA and be disappointed that it's not very reliable.
- jjwhitaker 7y agoI have one in a drawr, like many. At my a few relatives I have PiHole running and they love it just had to walk my grandma through occasionally turning the pi off and on (pull the power, reconnect). But I have the current Raspbian distro in a VM for messing around with as I don't need the hardware up. Once I have a use for the pi in my drawer it's going to be useful
- henryfjordan 7y agobut when the chip fails from heat stress, you only need to replace that. The case, cables, and power supply will all presumably be fine. $100 upfront, $35 to replace
- kingosticks 7y agoDespite the fact that doesn't add up, it depends what you are doing whether you need all that. I've had great value from my £34 Pi 4 since I don't need HDMI cables, cases or fans. I did also already have the other stuff too but I take your point there's no avoiding an SD card (yet).
- danieldk 7y agoIf you mentally decide "the Raspberry Pi is a $100 computer all-in" you will be much happier. You won't buy one to sit in a drawer (as many on HN have complained about), and you won't try to use a USB charger from your phone from 1992 and that SD card you got with your sandwich at IKEA and be disappointed that it's not very reliable. It's a bit of a shame that what started out as an educational computer is about $100 to get started properly. Nowadays I recommend Micro:Bit for tinkering (our daughter has one, she likes it very much). It's about 20 Euro and you have everything needed (including a battery pack if you want to use it portably). If you want a machine that fore serious work (NAS, media center, low-end desktop), before spending $100 one should at least consider spending a bit more and get a NUC. You can buy a NUC for around 120 Euro, then you have to add memory and storage. But at least, you get a machine with fast I/O, faster CPU, and is more expandable. It also does supports 4K and h.265 decoding like the Pi 4.
- deleted 7y ago[deleted]