5 ms·
I don't think that the heat sinks are mandatory.
by monocasa 7y ago
I don't think that the heat sinks are mandatory.
- Waterluvian 7y agoI see them all over. I see them being sold. If they're an option they really ought to be explained somewhere upfront.
- monocasa 7y agoI think you only need them if you want to overclock. Just because someone's selling something, doesnt mean you need to buy it.
- rcarmo 7y agoMy 4 runs at around 60C idle and hits 80C easily without overclocking (just regular loads). That is a bit too much for a tiny device (and a tiny plastic case).
- artemiszenk 7y agoHow often are you reaching the 80C throttle limit? Have you installed the latest firmware update? It should keep the temps from hitting the ceiling, depending on usage. Update information: https://www.retrorgb.com/raspberry-pi-4-firmware-update.html https://www.retrorgb.com/raspberry-pi-4-firmware-update.html
- SanchoPanda 7y agoThis did not help me. Using the pi4 as a desktop based machine, even just for streaming, will regularly hit 80c.
- rcarmo 7y agoThat update is not final and causes USB3 issues.
- SanchoPanda 7y agoMe experience is exactly the same. Usage is mainly watching Plex or other streaming video. I got rid of the case and just nailed it to the wall with some space on either side as a stopgap measure. This has reduced the frequency of the throttling as indicated by the temp gauge on screen, but not entirely avoided it. I have plans to add cooling this weekend. This is with all upgrades as of today.
- Waterluvian 7y agoThem being in the base kits they sell implies otherwise. That's my frustration.
- monocasa 7y agoI mean, the raspberry pi foundation sells cases, but doesn't sell heatsinks AFAIK. It's hard to say they're in the base kit.
- rcarmo 7y agoDepends. I am holding off on using mine 24/7 until I have a suitable case with good airflow, and definitely looking into active cooling. The 4 runs a lot hotter than the 3+.
- module0000 7y agoIf you have available vertical space, I've printed a "cooling case" that works great with my pi 3b+ without heatsinks. It's shaped like a flower vase(wide top, narrow bottom). The top is open(think of it like a large, open drinking cup), and the pi sits in the very bottom. Two funnel-shaped openings(large inlet, small outlet) allow outside airflow directly onto the CPU and wifi chips. So far it works at full load without throttling for at least the time span of a full length movie(my use-case is a plex media server). The concept is that exhaust heat leaving through the larger opening up top is heated(and expanding) air. The depressurized vase pulls cooler ambient air in through the 2 funnels, which strike the CPU and wifi module for a poor-mans "active cooling", albeit at much lower speeds than a motor-driven fan could provide. The downside is required vertical; the case is 8 inches tall. This is several times the vertical height of the board itself, so it's a bit of a non-starter for small embedded device use-cases. If you have space to spare though, it might be worth a shot depending on your use-case.
- solstice 7y agoIs there anything on top of it? If not, how do you deal with dust coming in from above when the pi isn't used that much (eg during the night) and the airflow lower?
- cydonian_monk 7y agoWhile I don't know about the Pi4, I've found that heatsinks are absolutely required for my uses of the Pi3s. In every situation where I've used a 3 I've had problems with them thermal-throttling down to a basically useless clock speed or just straight-up overheating and blowing. And I'm not overclocking. I don't feel safe using them in embedded applications without _at least_ a heatsink on the main CPU. My workbench Pi also has a small 5V fan on it. Are the 4s different somehow? Or has every 3 I've purchased (somewhere around a dozen) been defective? (I don't have this issue with the Zeros.)
- iamnotacrook 7y agoYou forgot to mention what you use them for. My pi3 is inside a Lego case with no fan. I watch videos with it, use it as a git repo host and share files from it and have never had a problem. I never turn it off. But perhaps if it was compiling or something I'd need to worry.
- dspillett 7y agoIt depends on the video. The pair of Pi units I currently have active (something from the v2 line and a 3B+) are being video players via LibreELEC (the third was a small server for DHCP, NTP, ad filtering DNS, etc, though those jobs are now done elsewhere as it kept eating SD cards). For almost everything I've thrown at the 3 all has been well. The thermal throttle kicks in after a while playing 1080p HEVC clips and occasionally on 720p ones, and makes them skip badly until it has chance to cool down, but that is not unexpected (I'm surprised 720p works as well as it usually does) as those are fairly processing intensive formats and being decoded in software. h264 and other encodings play back for hours on end (1080p or less, the limit of my current TVs) without it getting too warm for comfort. This is in a bog-standard case, with vents but no extra heatsinks or fans. When I have time to faf around (this is a busy month) I'll probably grab a 4 for the HEVC-in-hardware (though support for that in LibreELEC is only in Alpha versions ATM), and hand down the 3 (or put it away for some future project).
- artemiszenk 7y agoThe Raspberry Pi 4 no longer has incremental thermal throttling and was capable of running under "normal" desktop usage loads without active cooling. Under benchmarking cooling was required to stay under the 80deg C throttle limit. Article referenced: https://blog.hackster.io/meet-the-new-raspberry-pi-4-model-b-9b4698c284 https://blog.hackster.io/meet-the-new-raspberry-pi-4-model-b...
- nprateem 7y agoGot to say Pimoroni's Fan Shim [1] works well. It is easy to set up, and they have a python library with a systemd service that can auto start and stop the fan depending on the CPU temperature. While you can get away without cooling, the CPU will be throttled to pieces. [1] https://shop.pimoroni.com/products/fan-shim https://shop.pimoroni.com/products/fan-shim
- WrtCdEvrydy 7y agoNeato.