2 ms·
That's blatantly not true, as I've run into controller issues from verified authentic name brand cards. A 80kbyte/sec write with a specific pattern for about s
by monocasa 7y ago
That's blatantly not true, as I've run into controller issues from verified authentic name brand cards. A 80kbyte/sec write with a specific pattern for about six hours would absolutely hose the card (and yes the card was write leveling).
There's so much nice about the industrial cards that have nothing to do with it's ability to endure extreme environments, that I would basically never ship a non consumer product without them at this point.
- wtallis 7y ago> A 80kbyte/sec write with a specific pattern for about six hours would absolutely hose the card (and yes the card was write leveling). 80kB/s sounds a bit low for a card that is doing full "global" wear leveling; memory cards and SSDs that don't have DRAM often cut corners on the wear leveling, so they aren't as effective as proper mainstream SSDs. Your workload was probably issuing the writes in chunks smaller than the flash memory's page size (typically 16kB these days), so you probably had serious write amplification from the read-modify-write cycles even if that 80kB/s was sequential writes. SSDs with decent-sized write buffers and power loss protection capacitors can do more write combining than a memory card that has to be prepared for sudden power loss at any moment.
- monocasa 7y agoYeah, it is very low, which is why I bring it up. It was a controller bug, where the FTL completely lost track of some sectors. Write amplification has nothing to do with it.