2 ms·
I don't know the details, but the memory controller is twice as fast for the SD card than the old Pi's are, and SOMETHING (I'm not sure for certain what, don't
by gjsman-1000 7y ago
I don't know the details, but the memory controller is twice as fast for the SD card than the old Pi's are, and SOMETHING (I'm not sure for certain what, don't quote me) did change with the memory subsystem. This change is what allowed a workaround which allowed for 4GB of RAM for the first time (whereas before, the 1GB of RAM was a limitation throughout the SoC). So, it _may_ have a lite-IOMMU, but I'd open a forum posting for more info.
Edit: This could also be why the SoC uses an EEPROM. The RPF said that booting the Pi4 with this new memory system is _much_ more complicated than booting a Pi3, and that permanently burning the boot code into the SoC (like on the Pi3 and earlier) was not an option for the Pi4. Extremely high risk of backfiring.
- makomk 7y agoAs far as I know, the SoC supported higher SD card speeds all the way back to the first Pi and the original drivers even tried to use them. The trouble is, the older Pis couldn't switch to the lower IO voltages required to actually operate at those speeds. Early adopters actually had to track down older, slower SD cards in order to use their Pis because otherwise SD card access would fail due to the driver erroneously switching speeds.
- gjsman-1000 7y agoYou're talking about the early problems using Class 10 cards which has been solved for a long time now. The Pi 4 upgrades the SD controller system (almost entirely) and is SD50 compliant, which means the SD card bus is roughly twice as fast as older models.