3 ms·
I'd really like for PCs to send a wakeup to the TV. My AVC and ShieldTV can both wake up a TV connected for display, why can't a general computer do it? Curre
by tracker1 7y ago
I'd really like for PCs to send a wakeup to the TV. My AVC and ShieldTV can both wake up a TV connected for display, why can't a general computer do it? Currently using a 42" 4K high refresh TV as a monitor (would prefer 36-38" 4K).
I've resolved to just use a classic screen saver to keep the TV from shutting off, which causes total chaos when resuming from sleep.
Aside: anyone else notice how hard it is to actually use a screensaver these days. Linux desktops have removed it from in the box mode, and windows has totally obscured it away from you.
- m463 7y agoI have tried to figure all this out for my raspberry pi + HDMI monitor and everything is a grey area. Monitors use DPMS: DPMS: https://en.wikipedia.org/wiki/VESA_Display_Power_Management_Signaling https://en.wikipedia.org/wiki/VESA_Display_Power_Management_... I tried this with my Pi and could get it to sleep and wake, but waking would not seem to send an image, even though the backlight came on. Also confusing is that monitors also use HDMI, which seems to be from another standards body. It appears some TVs can do lots of stuff using HDMI-CEC: https://en.wikipedia.org/wiki/Consumer_Electronics_Control https://en.wikipedia.org/wiki/Consumer_Electronics_Control but the TVs I've bought support it poorly. Either it's hard to find if they support it, and when they do they might only support it piecemeal. It's sort of age and odel dependent. I've never seen a monitor that supports HDMI-CEC.
- tracker1 7y agoI believe it may be CEC at the TV level, but doesn't seem to be a place on the computer for this... may have to dig through the BIOS again, but pretty sure I'd remember it. I know I have it on my TV/AVR/ShieldTV as the volume for any of the above works as I expect.
- pault 7y agoI just bought an Intel NUC and this is one of the bios options. Those are amazing little computers of you don't need a discreet GPU. It's the size of a sandwich, and I got an 8th gen i7, 16gb of DDR4, and a 500gb nvme SSD for under $600! It handles 4k HDR content flawlessly. As a computer geek of a certain age, this is mind-blowing.
- jug 7y agoI’m thinking of one of those too. Maybe with the Akasa Turing replacement case for fabless operation. It will grow in size but not much more than two coke cans on top of each other. And it’ll cool a Core i5 barely breaking a sweat. The entire case is sort of a heat sink.
- shawnz 7y ago> Aside: anyone else notice how hard it is to actually use a screensaver these days. Linux desktops have removed it from in the box mode, and windows has totally obscured it away from you. And rightfully so. Now that we have moved to display technologies which are not affected by burn-in, what's the point? All they do is waste energy.
- CaptainMarvel 7y agoWell we seem to be moving right back with OLED :)
- shawnz 7y agoTrue.
- Phrodo_00 7y agoThere's a dongle that lets you inject CEC control signals into a HDMI signal from USB [1], but I haven't found a lot of programs that can hook it properly to Windows. It seems really useful if you have a media PC, though. [1] https://www.pulse-eight.com/p/104/usb-hdmi-cec-adapter https://www.pulse-eight.com/p/104/usb-hdmi-cec-adapter
- thomaskcr 7y agoIf it's connected via HDMI you can actually do that. There's a package called ddccontrol. For example, here is my code to toggle my 4th monitor between hdmi and displayport (hooked up to desktop or hooked up to a client laptop - this also switches out my synergy config at the same time later in the toggle script). CURRENT=$(sudo ddccontrol -r 0x60 dev:/dev/i2c-3 | tail -1) if [[ $CURRENT == *"+/15/3"* ]]; then sudo ddccontrol -r 0x60 -w 17 dev:/dev/i2c-3 else sudo ddccontrol -r 0x60 -w 15 dev:/dev/i2c-3 fi By passing other parameters you can control brightness, volume, power, etc.