5 ms·
> Gigabit Ethernet! Does it have PoE? Having to deal with one less cable would be nice. Especially given that the latest spec, IEEE 802.3bt from September 201
by throw0101a 7y ago
> Gigabit Ethernet!
Does it have PoE? Having to deal with one less cable would be nice.
Especially given that the latest spec, IEEE 802.3bt from September 2018, now allows for up to 100W per port:
* https://en.wikipedia.org/wiki/Power_over_Ethernet https://en.wikipedia.org/wiki/Power_over_Ethernet
- MisterTea 7y agoThere is an official PoE board that fits the pi 3+ which uses a 4 pin header by the ethernet jack to grab power. The pi 4 appears to have the same header. https://www.raspberrypi.org/products/poe-hat/ https://www.raspberrypi.org/products/poe-hat/
- phinnaeus 7y agoI have one of these but am new to RPi. It covers all of the GPIO pins in addition to the four header pins for power. Is there any way to still use the GPIO pins with the PoE hat?
- DougBTX 7y agoYes, though you'll need pass-through header pins: https://www.raspberrypi.org/blog/introducing-power-over-ethernet-poe-hat/ https://www.raspberrypi.org/blog/introducing-power-over-ethe...
- throw0101a 7y agoSeems kludge-y. IMHO, if one is going to do one of these types of embedded systems, then PoE should really be part of the design process from the beginning. They're using the Ethernet on the BCM2711, and Broadcom has sadly deemed PoE not needed I guess. The PoE HAT had a bunch of issues: * https://www.theregister.co.uk/2018/09/11/raspberry_pi_poe_hat_issue/ https://www.theregister.co.uk/2018/09/11/raspberry_pi_poe_ha...
- ars 7y ago> The PoE HAT had a bunch of issues They released a new version quite a while ago. I agree that it would be nice if PoE was built in, but there are better ways to say that than what you said. Also, the HAT has a transformer (and I assume if they included it, they know what they are doing), which seems like it would be too much for every single Pi to include one.
- zyx321 7y agoIt is a kludge. PoE is 48V DC, so any converter is gonna look bulky and impractical next to the Pi.
- ars 7y agoHow is that Hat $20 when the entire board itself is only $35?
- mbreese 7y agoI'd guess primarily the lower volume of the PoE HAT would play a role here. But, it's also a fully isolated power supply with a fan. To me, it looks like this couldn't be made on a fully automated line, so there would need to be manual assembly, which is also more expensive.
- gangstead 7y agoI also balked at the PoE Hat and ended up going with a $10 PoE splitter (with USB out). Works with any Pi (until this RPi4 with USB-C).
- TaylorAlexander 7y agoOooh I need to try this. Thanks for the idea!
- ethbro 7y agoEmbedded economics. How many million hats are they going to sell?
- woodrowbarlow 7y agodid they finally release the 100W spec? IEEE really let that spec languish for too long -- vendors got impatient and implemented their own. i had to write 60W PoE code supporting three different specs around 2015. bosch's design was the worst.
- throw0101a 7y ago803.bt has been finalized AFAICT, but I'm not sure about product availability. Do a search on the spec # and you'll find results.
- ars 7y ago> now allows for up to 100W per port: It doesn't draw anywhere near that. 15W max (for accessories), and 7W in heavy use (without anything other than the board itself).
- throw0101a 7y agoMy point was that PoE, especially with the recent revision, allows for very useful levels of power to be drawn, so if you're going to have an 'embedded' system with an Ethernet port, I would think it'd be useful to use it. Why plug in two cables (USB-C (power) and Ethernet (comms)) when you can just plug in one?