3 ms·
>Because it activated at low speed a g sensor wasn’t possible (?) so it got removed. Now you only have a single (notoriously unreliable) AoA sensor controlling
by salawat 7y ago
>Because it activated at low speed a g sensor wasn’t possible (?) so it got removed. Now you only have a single (notoriously unreliable) AoA sensor controlling it. To compensate for poor aero
To clarify: The G load gate had to be removed to enable the low speed activation.
The increased authority wasn't due to poor aero per se; but the fact that aerodynamic forces are dependent upon velocity. The slower you go, the more control surface deflection you need to get the same deflection that same control surface can generate at a higher speed.
>So the FAA approved MCAS with a 0.6 degree pitch limit, occurring at high speed, triggered by two independent sensors
Incorrect. The FAA approved input from only a single sensor, and the G load gate. Double sensor would have required simulator time; so was a non-starter. Both AoA sensors could talk to the Flight Control Computer, and MCAS as a result; but only one sensor was feeding data to the controlling FCC at a time.