3 ms·
I’m curious how you don’t know that you cut into the capsule. It’s supposedly a white powder, wouldn’t it make a cloud? Also if this is possible wouldn’t you
by jcims 7y ago
I’m curious how you don’t know that you cut into the capsule. It’s supposedly a white powder, wouldn’t it make a cloud?
Also if this is possible wouldn’t you put sone contingencies in place, like mount the grinder on limited travel arm or something? Sound’s like they just went at it with a $30 DeWalt.
The whole thing seems kind of ridiculous.
- a3n 7y agoThey're only a 20 something million dollar company, so everything is probably done as cheaply and simply as possible. Like many companies, they may also have trouble hiring people.
- simonh 7y agoIt depends how heavily it was disturbed. They describe it as like talcum powder. If it's that fine, tiny particles could disperse in the air invisibly.
- johntb86 7y agoIf you're using an angle grinder on something you expect some smoke to come out. You might not notice if it's slightly the wrong color.
- kevan 7y agoWhen you're grinding there's significant metal and abrasive dust thrown into the air. Given the airflow they generate and how fine the radioactive powder is even a small nick in the capsule could end up with a lot of material in the air without you noticing it. A jig to limit grinder motion sounds like really cheap insurance to prevent this failure mode.
- ethbro 7y agoI'm curious if the capsules like this are standardized or one-off. The description of the tungsten plug makes it sound like the latter. In which case a more sane procedure would probably mandate some examination of the capsule, formulation of a plan off-site, then implementation of said plan.