2 ms·
> For example, good luck trying to read a 5.25" floppy. You'll need to build your own hardware and write your own device driver to do it. It's really not that
by walrus01 7y ago
> For example, good luck trying to read a 5.25" floppy. You'll need to build your own hardware and write your own device driver to do it.
It's really not that hard, assuming some older PC format. Motherboards up to the 486DX4/120 generation had onboard controllers for the cable to interface to a standard AT type, half height 5.25" drive. I had one in my PC at the time. They read 360KB disks fine too.
From that sort of computer, which can run DOS 6.22, it's not too hard to use it to transfer the data to a modern machine.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F173920548126 https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.eb...
If you mean good luck trying to read a 5.25" disk due to magnetic degradation on the media,that's another problem.
- WalterBright 7y ago> From that sort of computer, which can run DOS 6.22, it's not too hard to use it to transfer the data to a modern machine. Well, yes, if you have an old computer with 3.5 and 5.25 drives, you can transfer to a 3.5 and read that on a modern computer. The trouble is, my old computers all failed due to capacitor problems. I can buy a 3.5 floppy usb drive, plug it into any computer, and it works. Not so for 5.25. > If you mean good luck trying to read a 5.25" disk due to magnetic degradation on the media,that's another problem. I haven't had much issue with that. About 20 years ago, I transferred my thousand or so floppies one by one to CD ROMs, and later to hard disks. Only a couple were unreadable. I've since found a handful of others, but no way to read them any more.