Good luck with your project. I am sure you will find it really rewarding when everything is wired up and it actually works. I like your detail of using strictly

Good luck with your project. I am sure you will find it really rewarding when everything is wired up and it actually works. I like your detail of using strictly vintage chips, not heard of that before, you are taking the art to new levels with that. I built my own computer with breadboards and a very simple EEPROM. My goal was to have it just turn on a few LED lights and do so according to a few very simple switches. That was satisfying enough. The wow it works moment was worth the many hours with things like an oscilloscope. If you want to do more than what I did - just get the thing to turn on - then I highly recommend the BBC BASIC. It is just built better than other BASICs that were doing the rounds and definitely suits a hardware oriented project. If you wanted a breadboard built computer to do actual interfacing, maybe to a strain gauge or other hardware then you will do well to take the BBC BASIC route. You can talk to your IO controller with it and do so with the built in assembler. Your code for presenting results or storing data can be done in BASIC and you can drop down to assembler to do the nitty gritty stuff quite easily. On today's modern computer even if running Linux you are kind of stuck as to where to start, with BBC BASIC you can accomplish low level things from first principles. Whatever you end up doing with your project, I think that there is definite merit in doing it with BBC BASIC, I think you can beat a path that others (particularly in the UK) will see as a good one to follow. Good luck and have fun stripping those wires!