3 ms·
Exchange the checksumming with hamming codes or with another ECC system with >=2 bit detection/correction capability and you're all set.
by bayindirh 7y ago
Exchange the checksumming with hamming codes or with another ECC system with >=2 bit detection/correction capability and you're all set.
- zzzcpan 7y agoNot really set, but even assuming you can make it work this is already way beyond checksumming the lack of which people complain about for some reason.
- bayindirh 7y agoMost of the big storage vendors are making it work with Erasure or Hamming Codes. They compensate damaged or missing disks in the arrays transparently and send you a small e-mail about the details of the disk you need to change. RAID-5 and RAID-6 is the most primitive and probably most deployed version of this checksum based compensation and recovery methods. Erasure/Hamming is used for bigger arrays where RAID-5/6 cannot build the disks in a reasonable amount time while they are under I/O load.
- monocasa 7y agoPretty much every NAND flash device out there uses full ECC rather than just a checksum. The whole industry relies on it for yield reasons.