4 ms·
> Plus, things like cars were still hackable with a few transistors and passive components, you could make a customised indicator timer, or turbo timer or what
by gumby 7y ago
> Plus, things like cars were still hackable with a few transistors and passive components, you could make a customised indicator timer, or turbo timer or what ever, and it was probably way cheaper if you knew what you were doing.
I nodded when I read this, thinking, "Yeah, and what's the modern equivalent?" Everything seems so high level and complex, like CANBUS in the case of car, USB for PCs and of course so much is locked down.
Then I realised that kids could get a start sticking an LED on a GPIO pin from an Arduino. I believe a PI is basically a PC, but perhaps it could have a few such pins as well, if it doesn't already. PCs used to have parallel ports which served a similar function.
Then from blinking a LED they could incrementally add a few more circuits: 7 segment display, some counters, who knows. Even some analog stuff (to hell with harmonics) are possible -- and controllable from your laptop or phone over network.
Perhaps Evel Mad Scientists or Adafruit has a few things in this direction?
- xigency 7y agoBy the way, there are multiple Arduino CAN-BUS shields out there, ranging from $15-$25. https://robotdyn.com/can-bus-shield-for-arduino.html https://robotdyn.com/can-bus-shield-for-arduino.html https://www.sparkfun.com/products/13262 https://www.sparkfun.com/products/13262
- wrs 7y agoNo worries. PIs do have GPIO pins, and lots of peripherals to plug into them. Nearly Adafruit’s whole product line is about hooking up random peripherals to I/O pins. And speaking of custom household devices, I’m about to spend $30 or so at Adafruit to build a thing that texts my wife when her outdoor herb pots need watering. :)
- cmpb 7y agoThat sounds fun! I've been rebuilding my wife's gardens and adding drip lines / irrigation. I ended up getting an OpenSprinkerPi[1] board to control the irrigation valves I'm installing. There's also a software project[2] that gives it a little more configurability/utility, including tying it into automatic watering based on the weather and such. I'm just having a lot of fun with it, and it seems like you are too! [1]https://rayshobby.net/wordpress/ospi/ https://rayshobby.net/wordpress/ospi/ [2]https://github.com/rszimm/sprinklers_pi https://github.com/rszimm/sprinklers_pi
- gsich 7y agoPay more for the humidity sensor. Not the resistive ones, they fail after a short time.
- HeyLaughingBoy 7y agoI'll go a step further. Don't pay for any sensor, you can make your own resistive sensor from a couple of resistors. The reason they fail is oxidation on one terminal. If you alternate the polarity as you read the sensor, it avoids that problem.
- wrs 7y agoAdafruit has a cheap capacitive sensor (using a micro controller with built in touch sensor circuitry) — but not that cheap. The polarity flip is a clever idea. Well, part of the fun is wildly over-engineering the thing, right?
- gsich 7y agoYes, but lifetime is still not the best.
- jamiek88 7y agoDo you have any guide to this you’ve seen or can recommend?
- HeyLaughingBoy 7y agoNope. I just did it once. I'll look around and see if I drew up a schematic.
- 52-6F-62 7y agoElectric guitars and tube amplifiers might be. But there is a decently high risk in playing with the grounding on those things. I’ve had my share of grounding faults while plugged into the wall or on stage (and that was just with the factory wiring on a 70’s Traynor YGM4). ...ouch But guitars are simple enough. You can replace components to add new features or change tone and volume responsiveness and even add certain wiring/component patterns to allow you some gain in the internal guitar circuits. Old effects pedals as well. There’s a ton of modding or BYO instructions out there. All the analog, point-to-point stuff is easily-enough hackable anyway. I mean if we’re drawing an equivalent to a car... the relative starting costs might be high, depending.
- tnecniv 7y agoDon't mess with tube amps. If you touch the wrong capacitor without knowing what you're doing you could really injure yourself. That said, there's plenty of safe audio equipment out there to experiment with. Before I got an EE degree, I was building effects pedals in my basement. Regarding effects pedals specifically, you won't end up saving much money versus buying one off the shelf due to economies of scale, but you can make something really fun and unique by yourself pretty easily.
- 52-6F-62 7y agoDefinitely agree! Tube or solid state alike. Both can house some dangerously-sized caps. Guitars are also quite safe and relatively forgiving as you keep the grounding intact. That said I only mentioned amplifiers as the GP was referring to hacking on cars—so I imagine the project wasn’t targeted at complete beginners when they were wondering about equivalent projects. And draining caps before working on them is one of the first things any tinkerer learns—or learns to stay away from.
- diyseguy 7y agoOnce everything went to surface-mount parts, I lost interest because it all became too difficult to hack.