4 ms·
> http://507movements.com/mm_015.html http://507movements.com/mm_015.html "Power as 1 to 7". I don't think so: the cable's tension is paralleled six ways again
by kazinator 8y ago
> http://507movements.com/mm_015.html http://507movements.com/mm_015.html
"Power as 1 to 7". I don't think so: the cable's tension is paralleled six ways against the load, so 6 times the force.
- zaroth 8y agoI really like how the fill pattern of the rope lets you see in the animation the decreasing velocity.
- jcims 8y agoYeah seems like a nightmare to animate though.
- derfniw 8y agoThe smallest pulley on the bottom betrays how it is done. The rope is a line along the side closest to the pulley, the other side of it // the wire pattern are made by attaching triangle(-ish?) shapes to it. Only the bend at the smallest pulley is so tight it shows.
- kazinator 8y agoIf your 2D vector graphics system has support for rendering a path style with diagonal hashes across it, and to continue that path across different primitives (line segments, circle arcs) it seems that then the problem is then easy. You just render the entire cable as a path, starting at the fixed end. You render that path that for different positions of the pulleys and there you have your frames, with the diagonal hashes moving at their apparently correct respective speeds.
- Ensorceled 8y agoThis is not a standard pully system.
- oasisbob 8y agoEven so - it's "just" a compound pulley system. The advantage of White's pulley seems to be the reduction of friction by only having two axles, and synchronized rope movement so that the rope doesn't need to slip over the sheaves. [1] https://aapt.scitation.org/doi/10.1119/1.2339377 https://aapt.scitation.org/doi/10.1119/1.2339377
- kazinator 8y agoThere is only cable. Unless the pulleys are stuck due to friction, the tension is equal in all sections of the cable. The load is being lifted by six segments of the cable, so 6x the tension: the machine's advantage is 6x.
- oasisbob 8y agoThat strikes me as odd too. The only way I can see that system being 7:1 is if the load itself is doing the lifting.
- kragen 8y agoRight, the animation is wrong; power is 1:7 if the bottom pulley is fixed and the top is movable, while the animation shows the other way around, which makes it, as you say, 1:6.