5 ms·
Building a Passive IMSI Catcher
- punnerud 8y agoAnyone got this to work on 4G? This example only work for 2G last time I did the same. 3G will be turned off during 2019 to make room for 5G, thats why I only ask for 4G.
- g_p 8y agoJust as a point of interest around 4G/LTE, it's worth noting that (many/most) LTE networks don't support calling natively over LTE. At least not for a lot of the handsets in the hands of their customers. Unless your handset implements the all-IP Voice-over-LTE spec (which was an after-thought to original 4G), all calls are handled by the circuit-switched fallback (CSFB) process, where calls go over the legacy 2G or 3G networks. Since many networks don't actually have VoLTE fully implemented and working yet (and many popular Android handsets have quirks/bugs/issues around it, coupled with MNOs trying to "pitch" VoLTE as an exclusive feature when you buy the handset direct on their own MNO-modified firmware), a 2G catcher should still work in many scenarios. If 3G is switched off, that (ironically) means that many people's calls will end up going over original 2G networks, where the handset doesn't authenticate the network at all! 3G handsets at least do a mutual authentication of the network. If you want to look at a real LTE catcher, take a look at this paper [1]. Worth noting this is not passive however, and requires transmitting in licensed spectrum, which defeats the point of this passive one. [1] https://arxiv.org/pdf/1702.04434.pdf https://arxiv.org/pdf/1702.04434.pdf
- 0b0001 8y ago2G might be around in Europe for some time, but East Asia already moved on. East Asia is leading the way in regard to switching-off 2G networks. In certain countries in the region, such as Japan, Macau, Singapore and South Korea, there is no 2G available at all. In Taiwan and Thailand, the major network operators have already phased out 2G with some operators in those countries still offering 2G services for a limited time. https://www.emnify.com/blog/global-2g-phase-out https://www.emnify.com/blog/global-2g-phase-out
- viraptor 8y ago2G is being turned off though. For example Australia killed it in 2018 https://www.vodafone.com.au/red-wire/goodbye-to-2g https://www.vodafone.com.au/red-wire/goodbye-to-2g so it's only 3g/4g availability.
- keithnz 8y ago3G is going to turned off very soon in Australia also
- 0b0001 8y agoNot sure about GSM and 3G, but 4G handsets do not transmit the IMSI during cell handover. They exclusively transmit the IMSI during 1) initial connection, that is, when you turn on your smartphone, and 2) upon request by the network. Active IMSI catchers abuse 2). At this stage of early connection setup, the network is not yet authenticated (the IMSI is required for the authentication). Therefore the smartphone must assume the IMSI request comes from the operator network -- and it cannot tell that it's actually a IMSI catcher. Case 1) is obviously pretty rare, so it might be a bit boring to perform IMSI catching on 4G.
- deleted 8y ago[deleted]
- stagger87 8y agoAside from the issues presented by the other comments, the core block doing work here is gr_gsm which is a GSM demodulator (FSK). 4G/LTE is not FSK so you are going to have to find a different solution for 4G.
- Fnoord 8y agoIf you can jam the 4G frequencies, most devices fall back to 2G/3G.
- anfractuosity 8y agoVery interesting. I didn't realise the IMSI number was ever sent in the clear.
- saagarjha 8y agoIf the author lurks here: you’ve blacked out the IMSI number in the screenshots but left the ASCII in the clear.
- pibefision 8y agoHow do you associate the imsi with any other type of data?
- jstanley 8y agoThe same way you associate any data point with any other. For example, set up your IMSI catcher next to a numberplate reader. If you repeatedly see a particular IMSI at the same time as a particular numberplate, then there's a fair chance that that phone travels with that car, and therefore that it likely belongs to the driver of the car. This is easily automated on a large scale, and if anything gets easier as the scale gets larger as you get more data points.
- _eht 8y ago“But metadata is worthless!” - NSA, probably.
- firethief 8y agoNumberplates are the tip of the constantly-broadcast data iceberg. Most phones are constantly announcing the ESSIDs of their known WiFi hotspots, and WiFi hotspot map data is readily available. It's like shouting out a map of home, workplace, favorite cafes...
- londons_explore 8y agoI don't think any modern phones do this for anything but 'hidden' networks. Am I wrong?
- borumpilot 8y agoYes, you are wrong, unfortunately.
- makethetick 8y agoAll it could take is an API call to turn it into an associated phone number.
- gregsadetsky 8y agoLinkNYC [0] kiosks have two security cameras (one above each ad display on both sides). Would it be somehow, or very, paranoid to imagine that these kiosks are also capturing IMSIs using a method similar to the one described above? If you join the wi-fi network that any kiosk advertises, you will definitely “re-attach” when you encounter a new kiosk (so some MAC related tracking is possible). But... do municipal CCTV setups usually go beyond video only and attempt to track people using various methods around bluetooth/MAC/IMSI? Is it probable? Improbable? We’ll only know in N years when someone leaks about it..? Has it already been done? [0] - https://en.m.wikipedia.org/wiki/LinkNYC https://en.m.wikipedia.org/wiki/LinkNYC
- StudentStuff 8y agoSounds quite regressive, some states like Oregon have made such setups (filming public rights of way with a fixed camera) illegal.
- voxadam 8y agoInteresting, does that mean outward facing security cameras with a view of public roads or sidewalks are prohibited in Oregon?
- StudentStuff 8y agoYes, filming the public right of way is illegal.
- crankylinuxuser 8y agoThis is one facet of what my talk is going to be about: https://ccc2019cfp.busyconf.com/activities/5c3a57314808fac1050000b2 https://ccc2019cfp.busyconf.com/activities/5c3a57314808fac10... I was accepted for a presentation "SigInt for the Masses;Building and Using a Signals Intelligence Platform for Less than $150" I already have the device built, and so does someone else on the west coast! My repo is here, which includes 3d printables (that I designed and printed), Bill of Materials, and bash standup scripts from current Raspbian. https://gitlab.com/crankylinuxuser/siginttablet https://gitlab.com/crankylinuxuser/siginttablet What does it look like? https://imgur.com/a/rImW7av https://imgur.com/a/rImW7av With the nrf mousejack / gr-nordic: https://twitter.com/CrankyLinuxUser/status/1118878830746308609 https://twitter.com/CrankyLinuxUser/status/11188788307463086... If you look through my scripts, I compile both gr-gsm and gr-lte, along with https://github.com/Oros42/IMSI-catcher.git https://github.com/Oros42/IMSI-catcher.git as referenced in the project. The signals I can work with/attack/listen are as follows: tx: 100KHz-1.5GHz rx: 20MHz-1.7GHz duplex: 802.11abgn duplex: nRF24LU1 (nearly all non-BT wireless keyboards and mice)
- orev 8y agoI’ve always thought about, to the point of almost trying to make one myself, is that this kind of thing would be a great addition to home security systems. If you ever had an incident, you’d be able to see what devices were around at the time, giving you a solid list of leads on who to investigate from there.