3 ms·
I believe the motivation for referring to things as anomalies is to forestall any rush to judgement about an unexpected event. AKA something 'bad' happened. Ol
by Gibbon1 8y ago
I believe the motivation for referring to things as anomalies is to forestall any rush to judgement about an unexpected event. AKA something 'bad' happened.
Old memory from the 80's an engineer mentioned that he went down to the lab and found an unhappy test tech. Guy was testing a new pressure sensor and it wasn't able to make 10,000 full cycles without blowing the diaphragm. Turned out the test setup was shock loading the pressure sensor. He was surprised it was almost passing. The solution was a rate limiting valve in the test setup. There was nothing wrong with the pressure sensor.
There is a great write up from one of the guys that developed the thrusters for the Apollo program. They had problem where you could get layers of frozen oxidizer and fuel in the inside of the nozzle. Which would then go explode and shatter the nozzle. The solution was to operate the thrusters so that didn't happen.
- TallGuyShort 8y agoCurrently reading On The Shoulders of Titans about the Gemini program. It gets slammed for being very poorly edited & formatted, etc. but it's dirt cheap if you can see past that. Quite a good collection of interesting engineering problems & solutions like that, and some very good lessons on how (and how not) to run major engineering projects (but as the reviews will tell you, it's just a human-readable series of events drawn from memos and calendars, etc - there's little analysis or real commentary). One of my favorites is that the maneuvering & attitude thrusters used ablative cooling, but ablated way too fast. They got incremental improvements by messing with the orientation of the laminated layers and other tweaks, but the real break through was squirting fuel down the inner walls of the cone immediately prior to ignition: got something like 4x the previous engine life and double their target.