3 ms·
I've seen pictures of people assembling core memory by hand, it looks remarkably similar to the repetitive process of hand weaving a high-end persian carpet.
by walrus01 8y ago
I've seen pictures of people assembling core memory by hand, it looks remarkably similar to the repetitive process of hand weaving a high-end persian carpet.
- astrodust 8y agoIt's surely super fussy, but at least it's a repeating pattern and not as fussy as wiring rope memory. That's a form of read-only memory used in the space program where the bits are wired in by hand to represent the stored program bit by bit. https://www.youtube.com/watch?v=P12r8DKHsak https://www.youtube.com/watch?v=P12r8DKHsak
- monocasa 8y agoDefects in core rope memory should be way easier to fix FWIW.
- kens 8y agoThey could fix bad cores in a core plane. They cut the X and Y wire to remove the bad core. Then new X and Y wires were rethreaded through the old cores and the new core. They tested planes after stringing the X and Y wires, before adding the sense and inhibit wires. If they found a problem after the sense and inhibit wires were threaded through, I don't know if they needed to remove them or if they could add a splice.
- astrodust 8y agoNot if you're in space on a mission.
- anyfoo 8y agoYes, but since you mentioned the repeating pattern (or absence thereof), I think we thought you were talking about mistakes in the bit pattern, and not material failure? And in this case, I certainly hope they just read out all the bits and compared them against expectations before launch.
- astrodust 8y agoIt's surely one of those things that's very, very fussy to assemble but relatively easy to verify. Someone built their own rope memory reader (https://www.youtube.com/watch?v=WquhaobDqLU https://www.youtube.com/watch?v=WquhaobDqLU) to access data stored in the Apollo modules. Assembling core memory is a lot easier, there's a very simple pattern, and verifying that it works correctly isn't that hard either. This is like weaving a complicated rug with many colors and a single-color rug.
- kens 8y agoManual assembly of a 64×64 core plane for SAGE (1953) took 40 hours. On occasion, an assembler would burst into tears if a core plane failed final testing and the work was wasted. IBM rapidly introduced automation and brought the assembly time down to minutes. In 1965, as demand for core memory increased, IBM moved some production to Japan and Taiwan, where labor costs were so low that manual stringing of cores was cheaper than automated assembly. Unfortunately for IBM, competitors also moved production to Asia, negating the advantage IBM had from automation.